F40 Wheel Removal/Intsllation | FerrariChat

F40 Wheel Removal/Intsllation

Discussion in 'Technical Q&A' started by Maeter, Nov 15, 2003.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Maeter

    Maeter Karting

    Nov 13, 2001
    136
    #1 Maeter, Nov 15, 2003
    The F40 central nut requires an amazing amount of torque to remove/tighten. I seem to remember a discussion about torque multiplying wrenches which can be used for that purpose. Would anyone know where to find such tools or even better have a Snap-on tool number for it. Thanks in advance.
     
  2. zsnnf

    zsnnf Formula 3

    Sep 11, 2003
    1,877
    #2 zsnnf, Nov 15, 2003
    My Snap On 4 to 1 multiplier is a GA-184A
    Max Torque Output 1000 lb.ft
    Max Torque input 275 lb.ft

    I hope this helps,
    Rick
     
  3. red-riot

    red-riot Karting

    Nov 14, 2003
    203
    Westchester, NY
    Full Name:
    Jon
    #3 red-riot, Nov 16, 2003
    Does anybody know the actual size of the wheel bush to remove the central nut on the wheels of a F40?

    Thanks

    Jon
     
  4. rexrcr

    rexrcr Formula 3

    Nov 27, 2002
    1,572
    Kalamazoo, MI
    Full Name:
    Rob Schermerhorn
    #4 rexrcr, Nov 16, 2003

Share This Page