F430 break bleeder valve replacment | FerrariChat
Buy

F430 break bleeder valve replacment

Discussion in 'Technical Q&A' started by jasonbedell420, Dec 16, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. jasonbedell420

    jasonbedell420 Rookie

    Sep 20, 2014
    5
    #1 jasonbedell420, Dec 16, 2021
    I want to change out a break bleeder valve on my 2007 F430. I have one that has some rounding from a wrench slip. Are these standard size? Anyone have a part number or a link to a replacment screw in valve?
     
  2. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    14,533
    Sydney
    Full Name:
    Ian Riddell
    #2 Qavion, Dec 17, 2021
  3. raemin

    raemin Formula 3

    Jan 16, 2007
    2,388
    Lyon (FR)
    Full Name:
    R. Emin
    #3 raemin, Dec 17, 2021
    The thread is M7 x 1.0, which is the standard thread on most European car. BMW for instance have exclusively used this thread on their cars (not motorbikes!), so you can go to the dealer and grab some cheap spare.

    Speedbleeder references SB7100S would make your life easier (https://store-speedbleeder-com.3dcartstores.com/SB7100S-Speed-Bleeder_p_15.html). The SB7100S is harder to source than the longer SB7100, if you don't mind the unnecessary length, these can also make it do.
     
  4. Ferrari Tech

    Ferrari Tech Formula 3

    Mar 5, 2010
    1,233
    Georgia
    Full Name:
    Wade Williams
    #4 Ferrari Tech, Dec 17, 2021
    They are M10 x 1.0. With an 11mm hex. They are readily available. Although you may find different hex sizes and some may be taller.
     
    Qavion likes this.
  5. Doctor Mark

    Doctor Mark Formula Junior

    Dec 15, 2005
    922
    Georgia
    Full Name:
    Mark Gronsbell
    #5 Doctor Mark, Dec 17, 2021
    FWIW it is brake not break.
     
    2NA, BD-Chrono and daytonaman like this.
  6. Rifledriver

    Rifledriver Three Time F1 World Champ

    Apr 29, 2004
    37,288
    Cowboy Capitol of the World
    Full Name:
    Brian Crall
    #6 Rifledriver, Dec 17, 2021
    They would not get rounded if people quit over tightening them.
     
    f355spider and AandSC like this.

Share This Page