Wanted F430 Front Splitter

My front splitter, ironically, has split! I removed the bumper for other work, only to find the top half of the splitter is riveted in, and has not bottom panel. ugh.

Typically the front OEM splitter is 2 pieces glued together.

Anyway, prefer Grigio Silverstone (from an existing car I suppose if you have replaced yours) or Carbon Fiber.

No problem with new, but also can be used if it is in decent shape.

Thank you!

 

What you describe is normally how it is done, I can even see washer marks from it being screwed in previously

At some point someone converted over to rivets though


Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Thank you so much Corey!

My attachment points I would say definitely have no threading whatsoever. They were either never there, or they completely re-did it.

Thanks again for the offer of the rivnut unit. I have one since I use it in constructing my art pieces. I am using it on the bumper for the undertray mount points (which I stole the idea from yours, thank you very much! , just got my SS rivnuts yesterday) as well as this.

Also used it to attach my washer hose inside the bumper, they used a rustable screw, ugh. Now back in its original mount point. This thing is handy for this car!


Image Unavailable, Please Login Image Unavailable, Please Login

 

Thank you.

Those are in decent shape. I will keep them in mind.

I am hoping I could find something that won't require me to do painting

John