F430 vibration | FerrariChat

F430 vibration

Discussion in '360/430' started by chris430, Mar 30, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. chris430

    chris430 Karting

    Oct 30, 2005
    182
    Dear Chatmates

    I had the pipes changed at dealer because of a campaign, after that I feel some vibration in the car at idle and
    also feels that at idle it goes a little up and down revs, during normal use all is normall, but that is extrange, do
    you know what could cause it?
    Thanks for your help, what is for you the best workshop in Europe?
     
  2. CAPRISTO EGOISTE

    Oct 25, 2007
    99
    Istanbul
    Full Name:
    CAPRISTO EGOISTE
    Which pipes installed?How? and did you controlled?
     
  3. chris430

    chris430 Karting

    Oct 30, 2005
    182
    Pipes were installed in the dealer due to a campaign, all equipment is original.
     
  4. fc2

    fc2 F1 Veteran
    Owner

    Nov 2, 2006
    5,263
    Silicon Valley Ca.
    Full Name:
    Frank C.
    Chris... when you say the pipes were changed, are you referring to the exhaust tips, brackets that hold the exhaust or some other part of the exhaust system?

    While I know there are problems with these parts, I was not aware they had become a Campaign. Do you have a Campaign number? If you're not sure, it might be on the repair order/work order from your Ferrari dealer.

    I did have one of my exhaust tips replaced on my '07 430 2 weeks after I took delivery of the car.

    Thanks,
    Frank
     
  5. maximus136

    maximus136 Karting

    Jul 17, 2006
    101
    latin america
    I had that problem but it had nothing to do with the pipes, one of the front fans lost a counterweight balance and that created a slight vibration at idle throught the whole car, maybe that's it??

    regards
    maximus 136
     
  6. dmark1

    dmark1 F1 World Champ
    BANNED Owner

    Feb 26, 2008
    11,439
    Americas Team Headquarters
    Full Name:
    Mark
    I am having the same problem. Seems that when the rpm's go through around 1200 rpm I have a mechanical sound from the back.
    They changed the actuators but that does not seem to have solved the problem..
    Still looking..

    Mark
     

Share This Page