F50 Fuel/Air maps graphed | FerrariChat

F50 Fuel/Air maps graphed

Discussion in '288GTO/F40/F50/Enzo/LaFerrari/F80' started by No Doubt, Mar 6, 2006.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. No Doubt

    No Doubt Seven Time F1 World Champ

    May 21, 2005
    72,740
    Vegas+Alabama
    Full Name:
    Mr. Sideways
    #1 No Doubt, Mar 6, 2006
    Last edited by a moderator: Sep 7, 2017
    After some effort, I've been able to find and graph the fuel air maps for my Ferrari 348 Spider.

    Interestingly enough, the Ferrari 348 Spider and the F50 both share the Motronic 2.7 ECUs. This means that I can graph your fuel/air and ignition timing maps that are on your chips on your F50.

    So, if you want to see your F50 fuel/air or ignition timing maps graphed out, just PM me for an address to send in your chips (I'll scan them and return them on the same day).

    Here's what a few of the fuel/air and ignition maps for the 348 look like when graphed:
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  2. bostonmini

    bostonmini Formula 3

    Nov 8, 2003
    1,890
    doesnt the 95 355 as well share the 2.7??? This is a really cool idea, very good thinking!
     
  3. No Doubt

    No Doubt Seven Time F1 World Champ

    May 21, 2005
    72,740
    Vegas+Alabama
    Full Name:
    Mr. Sideways
    Yes. That's a very good point. Some 456's, 512's, Mondial's, the 1995 F355's, and the F50 all share the Motronic 2.7 along with most 348's (the early 348's used Motronic 2.5, which I could probably scan/map/graph with minimal effort, too).
     
  4. gareth t

    gareth t Karting

    Nov 10, 2004
    118
    south wales
    Full Name:
    gareth thwaite
    intresting post

    heres a f40 ignition map... sorry i havent graphed it
    the load ir map sensor voltage!

    [​IMG]
     

Share This Page