Fab Speed and Capristo 3 | FerrariChat

Fab Speed and Capristo 3

Discussion in '360/430' started by rcuming, Sep 16, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. rcuming

    rcuming Formula Junior

    Joined:
    Oct 18, 2009
    Messages:
    255
    Location:
    Houston, Texas
    Full Name:
    Reid
    I'm thinking about installing Fab Speed headers on my 360 with the Capristo Stage 3 that is already on the car. I will keep the stock cats to hold the noise level down. Does anyone else have this combination?
     
  2. euro_king

    euro_king Formula Junior

    Joined:
    Mar 18, 2009
    Messages:
    759
    Location:
    San Jose, Jakarta
    Full Name:
    Jastien Weiss
    wow capristo plus headers? just make sure you got an earplug handy.
     
  3. f430vu

    f430vu Karting

    Joined:
    Aug 30, 2007
    Messages:
    84
    Location:
    SF Bay Area
    Full Name:
    Quan Vu
    I have Hyper-flow cats and Capristo 4.3 racing exhaust on my F430. This combo is loud and I love it!
     
  4. tazandjan

    tazandjan Three Time F1 World Champ Lifetime Rossa Owner

    Joined:
    Jul 19, 2008
    Messages:
    39,191
    Location:
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    Reid- I do not think just changing the headers is going to make a large difference in loudness level over what you currently have. Sounds like a nice set-up to me, a bit louder most likely, and you should pick up a small amount of horsepower from the change. Change to sport cats and you will get a lot more noise. Good choices on parts, Capristo and Kreissieg have the best sounding exhausts to me and the FabSpeed headers are just beautiful.

    Taz
    Terry Phillips
     
  5. Markjayw

    Markjayw Karting BANNED

    Joined:
    Jul 22, 2010
    Messages:
    160
    Location:
    Kennewick, Wa.
    Full Name:
    Mark
    Why upgrade the headers? The power increase is like 0, look at the dyno graphs. Maybe on a 355 prone to have header problems, but no performace advantage for a 360. If you have money burning a whole in your pocket, look at intake or CS ecu's.
     
  6. rcuming

    rcuming Formula Junior

    Joined:
    Oct 18, 2009
    Messages:
    255
    Location:
    Houston, Texas
    Full Name:
    Reid
    Thanks, but my main reason for replacing the headers is to avoid the dreaded stock exhaust header leak and potential engine damage that follows.
     
    Last edited: Sep 17, 2010
  7. euro_king

    euro_king Formula Junior

    Joined:
    Mar 18, 2009
    Messages:
    759
    Location:
    San Jose, Jakarta
    Full Name:
    Jastien Weiss
     
  8. X11OUD

    X11OUD Formula Junior

    Joined:
    Mar 22, 2008
    Messages:
    729
    Location:
    Manchester, England
    Full Name:
    Neil
    ?? Or maybe on a 360 also prone to header problems!!
    A friend of mine just swapped his blown 360 headers for Fabspeeds, lovely craftsmanship !
     
  9. rcuming

    rcuming Formula Junior

    Joined:
    Oct 18, 2009
    Messages:
    255
    Location:
    Houston, Texas
    Full Name:
    Reid
     

Share This Page