Factory Suspension Lowering Special @ Autobahn Exotics | FerrariChat

Factory Suspension Lowering Special @ Autobahn Exotics

Discussion in '360/430' started by Rich@Autobahn, Jul 23, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Rich@Autobahn

    Rich@Autobahn Rookie

    Joined:
    May 29, 2007
    Messages:
    44
    Last edited by a moderator: Sep 7, 2017
  2. SSR

    SSR Formula 3

    Joined:
    Jun 14, 2007
    Messages:
    1,134
    When lowering the 430 to Euro specs it is necessary to align?
    Do you corner weight the car again when lowering or changing exhaust or CF parts?
     
  3. Nick@Autobahn

    Nick@Autobahn Karting

    Joined:
    May 29, 2007
    Messages:
    124
    Location:
    Huntington Beach, CA
    Full Name:
    Nick
    We recommend having an alignment done after having any suspension modifications performed.

    At this time, we do not offer alignment and corner balancing services.
     
  4. SSR

    SSR Formula 3

    Joined:
    Jun 14, 2007
    Messages:
    1,134
    Nick what is the original ride height of a non Euro spec car?
    Center of the wheel to the upper part of the fender.
     
  5. BIG_DJE

    BIG_DJE Formula Junior

    Joined:
    Jul 20, 2004
    Messages:
    580
    Location:
    Newport Coast
    Full Name:
    Dave
    How many MM did you lower the red and yellow car.
     
  6. Rich@Autobahn

    Rich@Autobahn Rookie

    Joined:
    May 29, 2007
    Messages:
    44
    On the Yellow 430 we did 13 turns on the coilovers, and the red 360 we did 8 turns.
     
  7. BIG_DJE

    BIG_DJE Formula Junior

    Joined:
    Jul 20, 2004
    Messages:
    580
    Location:
    Newport Coast
    Full Name:
    Dave

    How many MM is that equal to.
     
  8. Nick@Autobahn

    Nick@Autobahn Karting

    Joined:
    May 29, 2007
    Messages:
    124
    Location:
    Huntington Beach, CA
    Full Name:
    Nick
    On the yellow car, we did not measure the amount it lowered the car in MM because 13 turns was specified by the owner of the vehicle (Jeffrey). The titanio grigio spider was lowered ~15mm from stock U.S Spec rally car height. I will measure the amount of drop the yellow coupe has now next week and post it up.

    Best Regards,

    Nick
     

Share This Page