Female connectors coming out of TR fuse box | FerrariChat
Buy

Female connectors coming out of TR fuse box

Discussion in 'Boxers/TR/M' started by tsyntax, Jun 11, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. tsyntax

    tsyntax Karting

    Dec 6, 2004
    88
    Baltimore, MD
    Full Name:
    Tony Syntax
    #1 tsyntax, Jun 11, 2009
    Steve or Brian-

    What type and size female connectors that plug into the male fuse box pins do you recommend as replacements? Do the old female connectors push out of the plastic (e.g., "K", "Y") connectors from the front or back? After one year, I am finally getting around to doing something with these. I will soon post the other stuff I've done (solving the A/C blower motor switch problem and hot start problem). I've just been really busy working a lot.

    Tony
     
  2. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    26,794
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    #2 Steve Magnusson, Jun 11, 2009
    Last edited by a moderator: Sep 7, 2017
    I don't ;). Seriously, for the high current circuits, I added a high current capable connection directly from the male output tab on the relay to the corresponding wire leaving the white connector (completely bypassing the PWB and stock connector) -- if you search on "TR white connector" you should get threads with pictures/discussion of what I've done and what others have done too.

    Image Unavailable, Please Login
     
  3. Rifledriver

    Rifledriver Three Time F1 World Champ

    Apr 29, 2004
    37,098
    Cowboy Capitol of the World
    Full Name:
    Brian Crall
    #3 Rifledriver, Jun 11, 2009
    They do come out backwards from the white plastic.

    I have looked high and low and except for a very brief period from one of the specialty automotive suppliers, have never found a source other than Ferrari for either the white plugs or the crimp on metal ends.
     
  4. Rifledriver

    Rifledriver Three Time F1 World Champ

    Apr 29, 2004
    37,098
    Cowboy Capitol of the World
    Full Name:
    Brian Crall
    #4 Rifledriver, Jun 11, 2009
    As Steve said, if you are repairing one of the high load circuts do not use the OE parts. Just take the power off the board to a remote relay. I mount them behind the board with the other components.
     
  5. tsyntax

    tsyntax Karting

    Dec 6, 2004
    88
    Baltimore, MD
    Full Name:
    Tony Syntax
    #5 tsyntax, Jun 11, 2009
    Steve and Brian:

    Thank you for the help and advice! I will do this this weekend and let you know.

    Tony
     

Share This Page