Fender shield project... | FerrariChat
Buy

Fender shield project...

Discussion in 'Ferrari Discussion (not model specific)' started by 92_348ts, Jul 15, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 92_348ts

    92_348ts Formula Junior

    Jun 6, 2002
    282
    Boise, Idaho
    Full Name:
    Chris
    #1 92_348ts, Jul 15, 2004
    Well, the fabrication shop just finished the buckets for my shields. I opted to go with a completely countersunk 288gto/F40 style recess that leaves the shields flush with the fender, as opposed to the factory stamped F355 style that still left the shields protruding. The paint shop will be welding them into place sometime tomorrow and I should have the car back early next week (also having the lowers and rear tail light panel painted).

    My question. Can someone with a "shielded" F355 please get me the proper factory placement (measurements w/reference points). Thanks in advance for your help in this matter.
     
  2. Cavallino Motors

    Cavallino Motors F1 World Champ
    Lifetime Rossa

    May 31, 2001
    14,143
    Florida or Argentina
    Full Name:
    Martin W.
    #2 Cavallino Motors, Jul 16, 2004
    Nice.

    As for placement just look at some pictures. It is about 3-4 inchec off the door and I believe it was 2 inches off the fold on the fender.

    My suggestion is to make a photo copy of them and tape them in the right place to see where it pleases your eyes.

    I had mine done on my 348. They came out great.

    Martin
     
  3. paulie_b

    paulie_b F1 Veteran
    Consultant Owner

    Jan 13, 2003
    6,842
    Jupiter, FL
    Full Name:
    Paul Bianco
    #3 paulie_b, Jul 16, 2004
    Chris, besides Martin's suggestion, the shields should already be curved to meet the curves in the fender. Take a look at some pictures to find the right spot. I sell the shields so I have had alot of experience with this.
     
  4. 92_348ts

    92_348ts Formula Junior

    Jun 6, 2002
    282
    Boise, Idaho
    Full Name:
    Chris
    #4 92_348ts, Jul 16, 2004
    Thanks guys. I have a pretty good idea where they go (within an inch or so), however I want them placed in the EXACT location where the factory recessed the F355. I know I am being anal, but this has become an expensive project so I want them to be perfect.
     

Share This Page