Good day All, Just cleaning out my shop... These parts were off a 1976 308 GT4 USA Version and are all used: One (1): Air Injection Tube with Check valve One (1): Oil Radiator Line (top) One (1): Oil Radiator Line (bottom) One (1): Front Bank Divertor Valve and mounting bracket One (1): rear Bank Divertor Valve and mounting brackets Four (4): Metal Camshaft Sprockets with pins I also have a good used (and was working) Front bank Cylinder head. Sadly, the head has been disassembled and so a rebuild would be suggested. I will provide pics over the next several days. Cheers, Sam
One (1): Air Injection Tube with Check valve Ferrari Part Numbers: 107803 and 100564 Asking: $125 USD + Shipping Image Unavailable, Please Login Image Unavailable, Please Login
One (1): Oil Radiator Line (top) Ferrari Part Number: 106277 This item is in good condition with no obvious signs of damage or wear, but is old...circa 1981 Asking: $100 USD + Shipping Image Unavailable, Please Login Image Unavailable, Please Login
One (1): Oil Radiator Line (bottom) Ferrari Part Number: 107414 (hose) with 102302 (Union) The hose is damaged and so this item would be used for the fittings in order to make a replacement. Asking: $50 USD + Shipping Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
One (1): Front Bank Divertor Valve and mounting bracket Ferrari Part Numbers: 107801 and 107780 (Bracket) Asking: $75 USD + shipping Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
One (1): rear Bank Divertor Valve and mounting brackets Ferrari Part Numbers: 107801, 107675, 107779 Asking: $95 USD + shipping Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Camshaft Metal Sprockets with pins Qty of 2 - Original Part Number: 110994 superseded to 113097 Qty of 2 - Original Part Number: 110995 superseded to 113098 Asking: $500 USD (complete set) + Shipping Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Those air lines and valves would be solid gold, to a California resident trying to smog any 308! GLWS! Nice cam gears too!
Good day BT, Indeed, I thought that these items would be helpful to someone needing to restore their GT4 to original USA spec... and/or needing to comply with CA emissions. I am sure I have the other air rail too.... I have to keep digging in my parts boxes. It is actually quite shocking what one accumulates over time... I guess I have reached that age where one stops acquiring and starts dispersing Thanks again for your positive regards! Cheers, Sam
You don't have to tell me! I have seven front turn signal lenses, and TWO clocks! Why remove the metal cam gears? Did you go with newer ones? I need to check, and make sure mine are not plastic fence versions...
Good day BT, Way back when I had a complete spare 308 GT4 engine when I had my GT4. Over time, when needed, I used the parts for my GT4 and when I sold my GT4 I started selling the remainder of the spare parts. I sold the Camshafts a while back which then left these sprockets. Cheers, Sam
Hi Sam: Sorry to hijack this thread but your inbox is full so I can't send you a PM. Are you still planning to build another round of 308 fuse boxes? If so, what's the status? Keith.
Good day Keith, Indeed it is best to keep the Fuse block questions, etc in the FuseBlock thread in the Boxer section so as to not splinter the info... I will post the update there, as there has been progress. As for PMs...I rarely check them and so it is best to send me a direct e-mail, as I get those directly and promptly. Cheers, Sam
Good day Robert, Sorry... just parts that one would find off an engine... and even those I am nearing the end of having. Cheers, Sam
Ferrari 308 Used Cylinder Head (Rear Bank / Right) with matching valve cover and oil filler Cap - Ferrari Stamped Part: 103514, Valve Cover: 105002 (supercedes to 107112), Oil Filler Cap: 103939 - Bare Head, although I do have a box of parts (springs, valves, etc that will go with the head). - This was a good used head off a 1976 308 GT4 that suffered a valve failure on the Front Bank... the rear bank (this one) was fine. Rebuilt replacement heads were found and so both were replaced leaving this one. - All of the valve seats look excellent. There is one small dent/nick/chip located in the adjacent to cylinder 1's intake valve and this is indicated in the picture. - Overall given the age of the head it should be considered as an excellent (light) rebuilt candidate. - Price: $650 USD + Shipping Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Good day All, One (1): Air Injection Tube with Check valve: $100 + Shipping One (1): Oil Radiator Line (top) : $75 + Shipping One (1): Oil Radiator Line (bottom): $30 + Shipping One (1): Front Bank Divertor Valve and mounting bracket: $50 + Shipping One (1): rear Bank Divertor Valve and mounting brackets: $50 + Shipping One (1): Used Cylinder Head (Rear Bank / Right) with matching valve cover and oil filler Cap: $500 + Shipping Cheers, Sam
Good day All, One (1): Air Injection Tube with Check valve: $90 + Shipping One (1): Oil Radiator Line (top) : $60 + Shipping One (1): Oil Radiator Line (bottom): $20 + Shipping One (1): Front Bank Divertor Valve and mounting bracket: $40 + Shipping One (1): rear Bank Divertor Valve and mounting brackets: $40 + Shipping One (1): Used Cylinder Head (Rear Bank / Right) with matching valve cover and oil filler Cap: $400 + Shipping Cheers, Sam
Hi Samsaprunoff, Do you still have this cylinder head for sale? I need to check which side i need but this is the right part number. I have also had a broken valve on my 1978 308GTB which has punctured a hole in one of the cylinder heads. Thanks Richard. +447795970240