Ferrari 308 Ring Nut Wrenches AS/847d and AV-815 (for Clutch and Transaxle nuts) | FerrariChat
Buy

Ferrari 308 Ring Nut Wrenches AS/847d and AV-815 (for Clutch and Transaxle nuts)

Discussion in 'Ad Archives' started by DougWa, Sep 14, 2016.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. DougWa

    DougWa Rookie

    Aug 18, 2016
    7
    Rochester Ny
    Full Name:
    Douglas Wakil
    #1 DougWa, Sep 14, 2016
    Hello! I bought two special tools when I went through my 308's gearbox and haven't used them since. I paid $110 each for them in 1989 but don't know what they should sell for... I listed the pair on Ebay for $150 plus shipping but if one of you buys them that's 15% off right away (for not having to pay the Ebay fees).
    The big one fits the 45 mm outside diameter ringnut for clutch service... I don't have any transaxle ringnuts handy to measure but it looks like the smaller one will do a 28 or 29 mm OD ringnut.
    Images:
    https://s12.postimg.org/cnwm56t65/DSCN2519.jpg
    https://s13.postimg.org/84ypdam5j/DSCN2518.jpg
    https://s11.postimg.org/vyp9gioqr/DSCN2517.jpg

    BTW, can someone tell me what an AP Racing clutch set for 308 should go for (new old stock)? Full set complete with the needed o-rings, ringnut, throwout bearing, locating studs.
    Also, I have a 180 MPH speedometer to sell. Not even a single inquiry off Ebay at $400. Info:
    part no. 900114338 and the tag on the body says: 1610 REV.=1M - Gen. 68.1005
    Just wondering if I'm way off on my asking prices.
    PM's welcome!
     
  2. DougWa

    DougWa Rookie

    Aug 18, 2016
    7
    Rochester Ny
    Full Name:
    Douglas Wakil
    #2 DougWa, Sep 14, 2016
    OOPS, sold via Ebay just this minute. Trying to find "edit" or "delete thread" now...
     
  3. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,379
    Houston, Texas
    Full Name:
    Bubba
    #3 BigTex, Sep 14, 2016
    You cannot edit the title without contacting a mod...no big deal.

    I would give $400 for the speedo, generally $500 is the ask...

    The clutch kit (OEM, not AP) would be $600 -$700ish..

    I would be interested in both as I kept one of early 308GTBs which had that speedo.
    Replacement ones had dual range, your is North American MPH only?

    Rare, if so....
     
  4. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,379
    Houston, Texas
    Full Name:
    Bubba
    #4 BigTex, Sep 14, 2016
    Keep this thread up for the other two parts!!

    I am not flush, with $$$ but both those items one "eventually needs" so thanks for posting!!!

    You need a spare speedo to run while the original one is out for repairs...
    :) :) :)
     
  5. DougWa

    DougWa Rookie

    Aug 18, 2016
    7
    Rochester Ny
    Full Name:
    Douglas Wakil
    #5 DougWa, Sep 15, 2016
  6. GordonC

    GordonC F1 Rookie
    Owner Rossa Subscribed

    Aug 28, 2005
    4,163
    Calgary, AB, Canada
    Full Name:
    Gordon
    #6 GordonC, Sep 15, 2016
    Douglas,
    That looks like the later speedometer - 76 to around 81 used one version of speedometer that matched one version of the sending unit, while 82-85 used a different speedometer matched to a different sending unit. They're not cross-compatible.

    I would like to buy the speedometer, if BigTex doesn't. I'm looking for a late version speedometer like this with the six digit odometer. I will send you a PM (private message) with contact information.

    Thanks,
    Gordon
     
  7. DougWa

    DougWa Rookie

    Aug 18, 2016
    7
    Rochester Ny
    Full Name:
    Douglas Wakil
    #7 DougWa, Sep 16, 2016
    NP Gordon, PM sent.
     

Share This Page