News

Ferrari 355 Alternator Removal

Discussion in '348/355' started by 355OXO, Nov 15, 2019.

  1. 355OXO

    355OXO Karting

    Apr 16, 2006
    147
    UK
    Full Name:
    Simon
    I am replacing the alternator on my F355. How do you get to the top mounting bolt. The bolt head and nut are 17mm and I can barely get my fingers to them, but I can't figure out how to get a wrench or socket on them.

    Any support/ideas appreciated or experience of undoing this particular bolt.

    Regards
    Simon
     
  2. To remove this ad click here.

  3. F355Bob

    F355Bob Formula 3


    It is tough. I did mine last summer. I think I used a socket , You just have to go to different positions. Try loosening the adjuster and the lower alternator bolt and remove the belt. See if the alternator can be moved a little to give more room. I thought it was impossible to but you can do it. Frustrating for sure
     
    Rifledriver likes this.
  4. Ferrarium

    Ferrarium F1 Rookie
    Rossa Subscribed

    Jul 28, 2018
    2,924
    Central NJ
    Full Name:
    Eric
    There is a 348 alternator removal thread if you search for that You can use as reference. Access to things is tricky you just have to think through it.

    I remove crank sensor from passenger wheel well with 2 foot 1/4 in socket extension for example not from under car like one would think.

    Sent using FerrariChat.com mobile app
     
    355OXO likes this.
  5. 355OXO

    355OXO Karting

    Apr 16, 2006
    147
    UK
    Full Name:
    Simon
    Thanks will try.
     
  6. To remove this ad click here.

Share This Page