Ferrari 360 AC Compressor Bolts and connector. | FerrariChat
Buy

Ferrari 360 AC Compressor Bolts and connector.

Discussion in '360/430' started by KimNorway, Mar 6, 2023.

Tags:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. KimNorway

    KimNorway Rookie

    Feb 23, 2021
    2
    Full Name:
    Kim Are Lerang
    #1 KimNorway, Mar 6, 2023
    Hello,

    I have read on this forum that several have used the AC compressor off a Vectra B. I am planning this install and have a couple of questions:
    1. The 3 back bolt holes need to be tapped, for the bracket containing the Screws: #16044024. What threads are these? I cant seem to find that information anywhere.(want to fix before I pull out the old one)
    AC compressor bolts.JPG
    2. The plug on my new compressor is 2-wire, but the best is probably to change the connector and just ground the - coming from the AC-compressor to the compressor like the original one?
    Connector AC.JPG
    3.I plan to run the stock clutch wheel as I have understood there are no problems running a 3-groove belt on a 4-groove wheel.

    Thank you :)
    Image Unavailable, Please Login Image Unavailable, Please Login
     
  2. mike32

    mike32 F1 Veteran

    May 13, 2016
    5,895
    Isle of man- uk
    #2 mike32, Mar 6, 2023
    Any bolt will do, just measure the diameter of the drilled hole and then look up the tapping drill diameters to suit various standard bolts.
     
  3. KimNorway

    KimNorway Rookie

    Feb 23, 2021
    2
    Full Name:
    Kim Are Lerang
    #3 KimNorway, Mar 6, 2023
    Yes, It was more if anyone knew the threads on them, so I could pre-tap them. All I know is that it is M8x40
     
  4. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    13,323
    San Carlos, CA
    Full Name:
    Mitchell Le
    #4 yelcab, Mar 7, 2023
    M8 1.25 pitch.
     
    KimNorway likes this.

Share This Page