Ferrari 412 Timing Chain Control/Cover Removal | FerrariChat
Buy

Ferrari 412 Timing Chain Control/Cover Removal

Discussion in '365 GT4 2+2/400/412' started by 360modena2003, Jan 9, 2022.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 360modena2003

    360modena2003 Formula 3

    Jul 11, 2009
    2,438
    #1 360modena2003, Jan 9, 2022
    I started on my "check list", the adjuster bolt seems to have plenty of adjustment left.

    The question now is what do I need to do to remove the timing cover? I have already removed the acorn nuts and WUR.

    Is there anything else that needs to come off? It isn't moving at all.

    Image Unavailable, Please Login Image Unavailable, Please Login

    Sent from my MAR-LX1M using Tapatalk
     
  2. SouthJersey400i

    SouthJersey400i Formula 3

    Mar 14, 2007
    1,679
    Romulus, NY (Finger Lakes)
    Full Name:
    Ken Battle
    #2 SouthJersey400i, Jan 10, 2022
    See if there is one bolt in the front. Not sure.
     
  3. 360modena2003

    360modena2003 Formula 3

    Jul 11, 2009
    2,438
    #3 360modena2003, Jan 10, 2022
    It is moving now, thanks.

    Its the glue they used that is making it difficult.

    Sent from my MAR-LX1M using Tapatalk
     
  4. 360modena2003

    360modena2003 Formula 3

    Jul 11, 2009
    2,438
    #4 360modena2003, Jan 10, 2022
    Got it off. The o-rings were glued on.

    Seems like it has been replaced before.

    Barely has any play. Image Unavailable, Please Login

    Sent from my MAR-LX1M using Tapatalk
     
  5. Al Campbell

    Al Campbell Formula Junior
    Owner Silver Subscribed

    Nov 22, 2013
    581
    Australia
    #5 Al Campbell, Jan 10, 2022
    The O-rings at the back should be cut at the top so when the cover is re-installed (slide O-rings into groove as cover is lowered) they need a small amount of sealer to seal them.
     
  6. 360modena2003

    360modena2003 Formula 3

    Jul 11, 2009
    2,438
    #6 360modena2003, Jan 11, 2022
    Thank you.

    Sent from my MAR-LX1M using Tapatalk
     

Share This Page