Ferrari Mondial/308 QV motor | FerrariChat
Buy

Ferrari Mondial/308 QV motor

Discussion in 'Ad Archives' started by ATSAaron, Jul 20, 2016.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. ATSAaron

    ATSAaron Formula 3
    Silver Subscribed

    Jun 1, 2004
    1,135
    Shady Shores, TX
    Full Name:
    Aaron Bunch
    #1 ATSAaron, Jul 20, 2016
    Last edited by a moderator: Sep 7, 2017
    This is a used 3.0 Quattrovalve motor from a 1982 Mondial. A customer purchased it to install in a Lancia Stratos replica, but has since changed his mind, sold the Lancia and now the motor needs to go.

    I tested compression at it's good. 158-171 psi on all eight cylinders. Then we stripped it down, replaced the cam seals, cam o-rings, distributor seals, valve cover gaskets, timing belts and tensioners. Everything was cleaned up and reassembled. A new water pump is also included with the engine.

    The intake runners and plenum are included. Yes, I know that looks like a 2V plenum, but it is actually correct for the EARLY QV Mondials too. No fuel injection components are included.

    This motor is basically ready to receive your fuel and electronics and drop in. If you have any questions please don't hesitate to ask.

    $7800 and I can ship it UPS freight anywhere in the US.

    Aaron
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  2. mr2by4

    mr2by4 Rookie

    Aug 9, 2016
    3
    #2 mr2by4, Aug 9, 2016
    So are you going to make a kit of any of the parts you used on your turbo "308" motor? What kind of power would you expect to get out of this with a toned down version of your set-up? 350 wheel hp?
     
  3. mr2by4

    mr2by4 Rookie

    Aug 9, 2016
    3
    #3 mr2by4, Aug 9, 2016
    Where did my question go?
     
  4. mr2by4

    mr2by4 Rookie

    Aug 9, 2016
    3
    #4 mr2by4, Aug 10, 2016
    What kind of power do you think you could make off a stock Euro QV like this one with ATS Exotics Fuel injection and turbo?
     
  5. ATSAaron

    ATSAaron Formula 3
    Silver Subscribed

    Jun 1, 2004
    1,135
    Shady Shores, TX
    Full Name:
    Aaron Bunch
    #5 ATSAaron, Aug 17, 2016
    From my research a stock QV motor will survive about 7 psi of boost if it's intercooled. That would be about 340 horsepower. Anything beyond that I would recommend forged pistons and better rings.

    Aaron
     
  6. ATSAaron

    ATSAaron Formula 3
    Silver Subscribed

    Jun 1, 2004
    1,135
    Shady Shores, TX
    Full Name:
    Aaron Bunch
    #6 ATSAaron, Aug 29, 2016
    Sold.
     
  7. miketuason

    miketuason F1 World Champ
    Owner Silver Subscribed

    Feb 24, 2006
    15,812
    Cerritos, CA.
    Full Name:
    Mike
    #7 miketuason, Aug 29, 2016
    Congrats Aaron! That's actually a good price.
     
  8. mwr4440

    mwr4440 Five Time F1 World Champ
    Rossa Subscribed

    Jun 8, 2007
    57,977
    Bavaria, The 'Other' Germany
    Full Name:
    Mark W.R.
    #8 mwr4440, Aug 29, 2016
    YEP !!!!

    :)

    Good Buy.
     

Share This Page