FERRARI WHEEL SPECS | FerrariChat
Buy

FERRARI WHEEL SPECS

Discussion in 'Ferrari Discussion (not model specific)' started by Ivan BeRossy, Oct 12, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Ivan BeRossy

    Ivan BeRossy Rookie

    Feb 18, 2004
    21
    #1 Ivan BeRossy, Oct 12, 2004
    WILL FERRARI 360 WHEELS FIT 86, 328 GTS THE SPECS ARE 18"DIA, 7.5" FRONT, 10" REAR, FRONT OFFSET 31.5, REAR OFFSET 38.95, BOLT PATTERN 5X108. WILL THE 360 LUG NUTS WORK OR ARE THEY NOT NEEDED ALSO ARE SHIMS NECSSARY$
     
  2. Mike C

    Mike C F1 Veteran
    Lifetime Rossa Owner

    Aug 3, 2002
    6,081
    Southeast USA
    Full Name:
    Mike Charness
    #2 Mike C, Oct 12, 2004
    You're new, so let me advise you that you don't need to (and SHOULDN'T) put the same post in both General and Technical forums. One spot is enough. Also, it's usually a good idea to use the SEARCH function. You'll find that there have been several thread that tell you what is required regarding spacers, etc, to put the 360 wheels on a 308 or 328, including spring changes in the rear due to the extra width.
     

Share This Page