FF PTU | FerrariChat
Buy

FF PTU

Discussion in 'Technical Q&A' started by Andy Fenwick, Jul 25, 2024.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Andy Fenwick

    Andy Fenwick Rookie

    Jul 25, 2024
    1
    United Kingdom
    Full Name:
    Andrew Fenwick
    #1 Andy Fenwick, Jul 25, 2024
    I’ve just had the PTU rebuilt on the FF
    It’s been re fitted and all oils are done etc
    When we clear the typical fault code as soon as you select first gear it shows the fault again
    Any suggestions please
    Thanks in advance
     
  2. tbakowsky

    tbakowsky F1 World Champ
    Consultant Professional Ferrari Technician

    Sep 18, 2002
    19,966
    The Cold North
    Full Name:
    Tom
    #2 tbakowsky, Jul 25, 2024
    They are going to have to spend some time to figure out why. That's all they can do. You could also try a different shop to get different eyes on the car. Maybe a fresh approach would help. Shops an get "car blind" during long term projects and over look things they normally wouldn't.
     
    flash32 likes this.
  3. windsock

    windsock Formula 3
    Rossa Subscribed

    Nov 29, 2006
    1,153
    #3 windsock, Jul 25, 2024
    Did they bleed the hydraulics and perform a self learn?
     
    flash32 likes this.
  4. FerrariErnie

    FerrariErnie Rookie

    Apr 15, 2020
    30
    Worcestershire
    Full Name:
    Martin parkes
    #4 FerrariErnie, Jul 31, 2024
    Hi Andy,
    We could take a look at it and see what we can find, we have a wealth of knowledge in PTU's having built nearly 90 of them now. We don't come across issues because we bench test all our repaired units before they are fitted but we have the equipment to run a PTU independent of the car so can test your rebuild.
    Let me know if you want to book it in.
    Cheers
    Martin Parkes
     

Share This Page