FF wind noise on front door windows / seal | FerrariChat

FF wind noise on front door windows / seal

Discussion in 'FF/Lusso' started by uberwag, May 31, 2022.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. uberwag

    uberwag Karting
    Silver Subscribed

    Jan 17, 2016
    123
    Winter Park, FL
    Full Name:
    Preston
    Searched and couldn't find a thread on this, but I feel like I've seen it before - does anyone have tips for how to reduce the wind noise around the front windows? The passenger window doesn't seem to seat closed perfectly on the seal/weather stripping, and wanted to get some advice on if others have had this same issue (and if so, how they've tried to address it). Thanks!
     
  2. andyrichter

    andyrichter Karting
    Silver Subscribed

    Jul 18, 2017
    204
    Oahu
    Same thing happened on mine. It was a simple fix by pushing the door seal back into place using a trim tool. You can look at the driver’s side to see how it’s supposed to sit flat. Good luck


    Sent from my iPhone using Tapatalk
     
    uberwag, Monteman and Nospinzone like this.
  3. Il Co-Pilota

    Il Co-Pilota F1 Veteran

    May 29, 2019
    6,023
    Hopefully some place nice.
    Full Name:
    A.B
    Perhaps brush the seal with some silicone. They can dry out a bit sometimes. I have fixed my share of wind noise this way.

    Sent from my SM-G930F using FerrariChat.com mobile app
     
    dustywusty likes this.
  4. otakki

    otakki Formula 3
    Silver Subscribed

    Mar 24, 2016
    1,634
    Not sure if it helps or not, but I also apply Armor All to all exterior rubber and plastic parts. It sure helps rubber stay supple for a long time. Yeah, it leaves a perimeter streak on edge of windows, but oh well.
     
  5. ANOpax

    ANOpax Formula 3

    Jul 1, 2015
    1,356
    The Netherlands
    I had the same problem and it was very easily resolved by my dealer.

    Is the window angle properly adjusted? I seem to recall seeing something in the workshop manual which showed adjustment screws in the base of the door which will adjust the cant of the window glass.
     

Share This Page