Hi all, I need to change the KPH speedo in my Spider for a MPH version, can anyone tell me how to remove it from the instrument cluster!! Thanks in advance. Regards, Phil.
Phil, from my poor memory. Remove 2 screws located under the dash; these hold the instrument cluster in place. Carefully tilt the entire cluster up away from the screws and lift up. The top is locked in place by a flat hook and pocket. Mark and unplug the various connections behind the cluster. Once free remove cluster. If I recall correctly you have to remove the center gauge assembly and then the speedometer. Just a few sheetmetal type screws. Install your new instrument and you are home free. Good luck, John.
John, Malcolm, That`s just the information I needed, thanks very much. Another job for the bank holiday weekend now. Regards, Phil.
Why? I just spent $300 having the MPH speedo for my Boxer re-silk screened in KPH. I wanted the speedo to match the odometer since it was already in Kms.
Hi, The car has never been registered in the UK, it is an Italian spec car that was exported to the Middle East and to use it in the UK it has to have a speedo that reads in MPH not KPH otherwise it will not pass an MOT here. Regards, Phil.
