FOC Spring Tech Session - PICTURES

This years FOC Spring Tech Session will be held May 2nd. Our host is Ed Jerzyk who has arranged for us to use his shop, Ed's Affordable Automotive in Palatine, IL. for the event

Here are the details:
Open event for all FOC & F-Chat Participants
When: Saturday, May 2nd
Time: 11:00 AM
Where: Ed's Affordable Automotive 421 S. Vermont St. Palatine, IL

A free light lunch is planned. For a map see http://local.yahoo.com/info-17191191-ed-s-affordable-automotive-palatine;_ylt=AutMJgcIVazfYT18k7GwTPqHNcIF;_ylv=3?csz=Palatine%2C+IL.

Post if you plan to attend or have any questions.

See you there,
Dave

 

Yes, I'll definitely try to make this!

 

I'll be there.

 

Count me in.

 

I'm in as well.

 

I'll be there right after unloading a semi of scout flowers. Should ready to roll at about 10:30, so probably pull up around 11:30am.

 

Is your front wheel bearing inspection still a "go" on the 328?
Dave

 

Yep, planning on it.

 

I should be there.

 

Make sure to stock up on all neccessary parts for the tech session

Belts
Battery
Filters
plugs
pads
rotors

Call Thom or Jeremy at Continental before you head up to Ed's.
630-655-3535
[email protected]

 

Any room in the event for a Saturn? If y'all don't mind, I'd like to stop by

 

You have my personal invitation.

Let us know for sure, as food and beverages will be served.

Sparky

 

Seeing as how I got laid off last week, and don't have a job/obligations on Sat's now...I say count me in. I'll let you know if anything changes

 

We'll be there!

 

Oops! Spring fishing trip with dad (91). Have fun guys!

 

Walleye??

 

That is great!

 

Yes. Heading to Winneconne (Oshkosh). Probably get some white bass as well.

He's the energiser bunny. Plays golf 5 days a week and walks the course!

 

Anyone going to the Supercar Saturday and then to the Tech session? I was planning to do both.

 

Just the Tech Session for me. I have another commitment in the morning starting at about 5:30am and will probably be finished at about 10am.

 

If you could bump the tech session to 11:30, then many people could do both the Tech Session and SupercarSaturday.com

THE GLEN : 2660 Valor Dr, Glenview, IL 60026-8058
1: Start out going EAST on VALOR DR toward PATRIOT BLVD. 0.0 mi
2: Turn LEFT onto PATRIOT BLVD. 1.0 mi
3: Turn LEFT onto WILLOW RD. 3.2 mi
4: WILLOW RD becomes PALATINE RD EXPRESS LN. 4.6 mi
5: PALATINE RD EXPRESS LN becomes E PALATINE RD. 1.6 mi
6: Merge onto IL-53 S. 2.2 mi
7: Merge onto W EUCLID AVE. 0.4 mi
8: Turn RIGHT onto HICKS RD. 0.5 mi
9: Turn LEFT onto E ILLINOIS AVE. 0.2 mi
10: Turn RIGHT onto S VERMONT ST. 0.5 mi
THE TECH SESSION : End at 421 S Vermont St Palatine, IL 60067-6945


B: 421 S Vermont St, Palatine, IL 60067-6945
Total Time: 23 minutesTotal Distance: 13.98 miles

 

It'd be great fun to have you guys at the tech session.

This is a rather informal meeting. Dave has a few projects/ideas that he will demonstrate, so it doesn't matter that much whether you're there at the beginning.

However it'd be great if we could get an approximate headcount from your group as we will serve a light lunch (sandwiches).

 

Ditto, and if Carla's crew would like to do there own tech session, we have to clear it with Ed. I'd love to see the Lambos and others there.

 

BTW: Ed has serviced Lambos as well. Not sure "service" is the right term if you have to take half the car apart though...


After I saw what it took to replace a clutch on a Countach I was very happy with the maintenance bills I'm getting for my Ferrari.

 

We planning on cruising from The GLen to The Autobahn for:
The One Lap of America competitors will be racing at:
Autobahn Country Club
3795 South Patterson Road

http://www.onelapofamerica.com/history/schedule.shtml?y=2009

I've printed plenty of directions for anyone that wishes to drive from The Glen to Joliet.