Hello. For Ferrari XR-F21RDS Bluetooth module with CD-Changer dummy: Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login This device you connect to the radio. By pressing the „CD-Changer“ button the music from the Bluetooth module will be played. So you can stream music directly from your Smartphone to the Ferrari Radio. Delivered parts: * CD Changer dummy * Bluetooth module with fitting connector 4.0 The Radio will not be delivered. The dummy enabled the signal input in the radio. All is ready to connection. Only connect the red cable of the Bluetooth module to the ignition 12 Volt. And the black cable with the ring connector screw on the radio chassis. If you need cinch cable for wired line-in, then write me PM, then i can add you a fitting cable. The parts are used, all is perfect working. The Bluetooth module is well functioning. 2 seconds after power on the connection is established. The range is minimum 30 meters. 129Eur Please write me PM. EU shipping included. For worldwide shipping write to me. Private selling without any warranty.
It works with the Ferrari XR-F21RDS and the XR-F20, which are installed in the 355, the 456 and the 550. These Car Stereos where produced by Sony.
Hello, I'm looking for something like this .... play Spotify on the oem radio. Can you sent me an message if this is still available. Or if you can set me up withe a new one. please send me a mail to : [email protected] grazie mille ;-)
How do you get the radio out of its slot? I bought myself the Sony-compatible-tools. But they don't help at all. On the 2 sides (like in the photos) they just slide back out. And in the 4 corners they are very hard to get in and back out and just touch the casing. The tools i bought: https://www.amazon.com.be/dp/B0CQMTKL36?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
The 2 upper ones are the right ones (horizontal) Both have to put in at the same time. Push then the car stereo out from the back. Dont pull on the plastic mechanism at the right side. Its old plastic, that can easily break.
You were right. It were the 2 upper slots. After i got it out i found this video. Wich might be helpfull for future diy'ers