forgestar 19s | FerrariChat

forgestar 19s

Discussion in '360/430' started by Johnl19, Jan 26, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Johnl19

    Johnl19 Karting

    Joined:
    Oct 30, 2014
    Messages:
    99
    Just installed my Forgestar f14s . 19x8.5 F with 235/35/19 Mpss and 19x11 R with 295/35/19 Mpss... Car looks sick. You think i need a fender rolling? Looks very close. I want to ask before i do damage!!! Ill take better pictures when im not snowed in here (NY) thanks again guys, john. Car is a f1 01 360 spider
     
    Johnl19, Jan 26, 2015
    #1
  2. E60 M5

    E60 M5 Moderator Moderator Owner

    Joined:
    Jan 2, 2006
    Messages:
    8,166
    Location:
    Wash DC area
    Full Name:
    Robert
    Most likely.
     
    E60 M5, Jan 26, 2015
    #2
  3. Johnl19

    Johnl19 Karting

    Joined:
    Oct 30, 2014
    Messages:
    99
    only thing im really concerned about is the front,,, anyone else have this same setup on stock suspension
     
    Johnl19, Jan 26, 2015
    #3
  4. acmw

    acmw Formula Junior

    Joined:
    Apr 28, 2006
    Messages:
    575
    Location:
    Nj
    Full Name:
    Alex
    yes you will need front fender rolling which can also cause damage , cracking to the fender paint. my 19s were to wide same spec as yours and got caught in the fender and pulled it down.
     
    acmw, Jan 27, 2015
    #4
  5. DonJuan348

    DonJuan348 F1 Rookie Owner

    Joined:
    Aug 5, 2008
    Messages:
    4,442
    Location:
    Taxing Jersey
    standard height not necessarily ...lowered definitely. To be safe yes. Did you weight those? I'm interested in the same wheel(concave) to replace my HRE.

    Currently I have 19x8.5,11 235 front 305 rear
     
    DonJuan348, Jan 27, 2015
    #5
  6. Johnl19

    Johnl19 Karting

    Joined:
    Oct 30, 2014
    Messages:
    99
    trying to get permission to upload pix
     
    Johnl19, Jan 27, 2015
    #6
  7. Johnl19

    Johnl19 Karting

    Joined:
    Oct 30, 2014
    Messages:
    99
    Last edited by a moderator: Sep 7, 2017
    Johnl19, Jan 27, 2015
    #7
  8. Johnl19

    Johnl19 Karting

    Joined:
    Oct 30, 2014
    Messages:
    99
    Last edited by a moderator: Sep 7, 2017
    Johnl19, Jan 27, 2015
    #8
  9. Johnl19

    Johnl19 Karting

    Joined:
    Oct 30, 2014
    Messages:
    99
    Last edited by a moderator: Sep 7, 2017
    Johnl19, Jan 27, 2015
    #9
  10. Johnl19

    Johnl19 Karting

    Joined:
    Oct 30, 2014
    Messages:
    99
    Anyone in this chat with 19x8.5 front rim with 235/35:19 ever need fender rolling?!?
     
    Johnl19, Jan 29, 2015
    #10
  11. DonJuan348

    DonJuan348 F1 Rookie Owner

    Joined:
    Aug 5, 2008
    Messages:
    4,442
    Location:
    Taxing Jersey
    I currently have that size and didn't need to roll fenders until I lowered my car...


    I was hoping forgestar would be more concave for 360
     
    DonJuan348, Jan 29, 2015
    #11
  12. Zcobra1

    Zcobra1 Formula 3

    Joined:
    Oct 9, 2012
    Messages:
    1,242
    Location:
    So Cal
    Full Name:
    Bert
    Roll it for peace of mind, then run 1.5 degree negative camber up front to tuck
    them in and some better grip. If you drive the car spirited once in a while they
    should wear fine.
     
    Zcobra1, Jan 29, 2015
    #12
  13. sanfran

    sanfran Formula Junior BANNED

    Joined:
    Apr 10, 2004
    Messages:
    523
    Location:
    LA
    Full Name:
    Oliver
    Did you have to specify fitment for Ferrari center caps or did they just happen to fit?

    Do you have more pictures?
     
    sanfran, May 15, 2015
    #13
  14. ShineKen

    ShineKen F1 World Champ Silver Subscribed

    Joined:
    Aug 3, 2007
    Messages:
    19,892
    Location:
    Southern California
    Full Name:
    Nostradamus
    What are the offsets?
     
    ShineKen, May 15, 2015
    #14
  15. Johnl19

    Johnl19 Karting

    Joined:
    Oct 30, 2014
    Messages:
    99
    +26 front +35 rear
     
    Johnl19, May 15, 2015
    #15
  16. ShineKen

    ShineKen F1 World Champ Silver Subscribed

    Joined:
    Aug 3, 2007
    Messages:
    19,892
    Location:
    Southern California
    Full Name:
    Nostradamus
    Good reference pt. id camber up to 2 degrees in the front to see if it clears before rolling
     
    ShineKen, May 15, 2015
    #16
  17. ShineKen

    ShineKen F1 World Champ Silver Subscribed

    Joined:
    Aug 3, 2007
    Messages:
    19,892
    Location:
    Southern California
    Full Name:
    Nostradamus
    Rolling is last resort. Id even scale down to a 225 if need be before rolling.
     
    ShineKen, May 15, 2015
    #17
  18. Johnl19

    Johnl19 Karting

    Joined:
    Oct 30, 2014
    Messages:
    99
    I had to roll the fenders it was touching a little. Been rolled for 2k miles now with no problems. Never touched allignment. Never bent a rim. Car rides pretty well.
     
    Johnl19, May 16, 2015
    #18
  19. Johnl19

    Johnl19 Karting

    Joined:
    Oct 30, 2014
    Messages:
    99
    And the ferrari centercaps i had custom made from the forgestar caps
     
    Johnl19, May 16, 2015
    #19
  20. sanfran

    sanfran Formula Junior BANNED

    Joined:
    Apr 10, 2004
    Messages:
    523
    Location:
    LA
    Full Name:
    Oliver
    Where did you get them made?

    I need a set.
     
    sanfran, May 16, 2015
    #20
  21. Johnl19

    Johnl19 Karting

    Joined:
    Oct 30, 2014
    Messages:
    99
    Exclusive vinyl, located in long island NY
     
    Johnl19, May 17, 2015
    #21

Share This Page