Found that Dipstick tube threads not stripped Union broke | FerrariChat

Found that Dipstick tube threads not stripped Union broke

Discussion in 'Technical Q&A' started by dhs-9, Jul 16, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. dhs-9

    dhs-9 Formula Junior

    Feb 6, 2004
    292
    #1 dhs-9, Jul 16, 2004
    In additon to the other post below, I discovered that the threads had not stripped but that the union broke just below the nut. The lower dipstick tube is still in hte hole and will not allow the remaining part of the nut to come off. Any suggestions . Also when the nut does come out can an easy out be used to get out the broken part of the union. What a mess!
     
  2. Verell

    Verell F1 Veteran
    Consultant Owner

    May 5, 2001
    7,017
    Groton, MA
    Full Name:
    Verell Boaen
    #2 Verell, Jul 16, 2004

Share This Page