FR 106 hub tool, source?

I am attempting to buy a FR106 rear hub tool, like this:

https://www.toolsource.com/ferrari-tools-c-1321_831_1551/ferrari-rear-axle-groove-nut-socket-44mm-p-114377.html

Both toolshop.com and baumtools.com will not ship to me in Australia.

Any suggestions on a shop that could ship to me?

Thank you.

 

https://www.hillengineering.co.uk/ringnut-tools
Any good?

 

Andy thanks for the Hill reference however they don't make it. I approached them a few months back and they said they rarely have any call for it.

 

Pretty sure i just used the standard 44mm ring nut socket on mine

 

+1

If you are working on the rear hub, you don't need that "deep reach" 114377 tool. That tool can be used for the 44mm rear hub ring nut, but is probably also meant for use on some 44mm transaxle ring nut on a long shaft (i.e., the factory made a common tool that could be used on either). Try these for the rear hub 44mm ring nut:

https://www.ricambiamerica.com/rnt-44-ring-nut-tool-44mm.html

https://www.hillengineering.co.uk/rnt-44

Hill Engineering, being a UK company, should have a very good shipping system for getting stuff to Australia (and it's the better price ).

Or are you actually needing the deep-reach version of the tool for something else?