News

Front challenge grill 360

Discussion in '360/430' started by cre_man, May 13, 2018.

  1. cre_man

    cre_man Karting

    Aug 8, 2017
    97
    The Netherlands
    Hi Guys,

    Couldnt find it in my searches. Well not a definitieve awnser.

    When you have a Modena coupe And you want to upgrade the OEM front slicer grills to the CS style challenge grills. Do you just Need the grills. Or do you Need brackets And grills?

    Please give me the info so I can start searching or Maybe somebody has something laying around.

    Thnx René
     
  2. To remove this ad click here.

  3. Skidkid

    Skidkid F1 Veteran
    Rossa Subscribed Owner

    Aug 25, 2005
    6,664
    Campbell, CA
    Full Name:
    John Zornes
    If you want it to look right, you need the bezel and the grill.
     
    cre_man likes this.
  4. timwu12

    timwu12 Formula Junior

    Oct 31, 2014
    692
    Houston, TX
    cre_man and gt1995 like this.
  5. cre_man

    cre_man Karting

    Aug 8, 2017
    97
    The Netherlands
    Great! Now let’s see id this is a DIY job or a dealer upgrade.

    And the towhook? Is the screwhole still useable?
     
  6. becausephilchow

    becausephilchow Formula Junior
    Sponsor Rossa Subscribed

    Aug 26, 2016
    487
    Hong Kong
    I picked mine up from ProSport Ferrari in the UK. Fit quite well. Can be done DIY if you are able to remove the bumper. Nothing difficult, just a bit time consuming.
     
  7. To remove this ad click here.

  8. timwu12

    timwu12 Formula Junior

    Oct 31, 2014
    692
    Houston, TX
    cre_man likes this.
  9. cre_man

    cre_man Karting

    Aug 8, 2017
    97
    The Netherlands
    Great. Thnx for your help
     
  10. rizzo308

    rizzo308 Formula 3
    Silver Subscribed

    Sep 12, 2004
    2,227
    Perth, Australia
    Full Name:
    riggio
    You don't need to buy the CS plastic bezel For $200 + each ur havin a laugh.:D
    Your standard bumper grills are the duks nuts they'll work fine. Simply cut the slats out of the standard slicer grills flush with the outer frame (red arrows) as close as u can I used a hacksaw blade on it's own wrapped a bit of tape around one end to make a handle protect wee fingers. Cut out all 8 fins once cut out sand down any high spots say 120 or 80 grit paper then scotch pad the hole thing plastic primer it (I have p primer in rattle can) then it to ur local body shop get them to spray some primer putty on it sand it nice and smooth paint it black. Huchi mamma. If u need a repo CS tow hook to go with them CS grills PM me. Gud Luk

    Image Unavailable, Please Login







    Image Unavailable, Please Login
     
    cre_man likes this.
  11. RANDY6005

    RANDY6005 Formula 3
    Rossa Subscribed

    Jan 9, 2017
    1,759
    Jacksonville
    Full Name:
    RANDY
    cre_man likes this.
  12. To remove this ad click here.

Share This Page