Front fender bent out. Dallas area | FerrariChat
Buy

Front fender bent out. Dallas area

Discussion in 'Texas' started by skywalkermd, Aug 9, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. skywalkermd

    skywalkermd Karting

    Oct 30, 2013
    51
    #1 skywalkermd, Aug 9, 2015
    I noticed edge bent out about one inch and 3" " long. Can't pound it back. Do Dallas Ferrari owners suggest Ferrari dealership or another reputable body place 1990
     
  2. skywalkermd

    skywalkermd Karting

    Oct 30, 2013
    51
    #2 skywalkermd, Aug 9, 2015
    BTW its above wheel well. Looks like whole sides and front may have to be replaced !!:0
     
  3. Skidkid

    Skidkid F1 Veteran
    Owner Rossa Subscribed

    Aug 25, 2005
    9,538
    Campbell, CA
    Full Name:
    John Zornes
    #3 Skidkid, Aug 9, 2015
    Are you talking about a wheel snag on the wheel arch? Provide a picture and we may be able to help.

    If it is a wheel snag, most any competent body shop can roll the fenders and fix a snag.
     
  4. vrsurgeon

    vrsurgeon F1 World Champ
    Silver Subscribed

    Dec 13, 2009
    16,543
    Charleston, SC
    Full Name:
    Curt
    #4 vrsurgeon, Aug 9, 2015
    Need to see a picture of it..
     
  5. Melvok

    Melvok F1 World Champ
    Owner Silver Subscribed

    Jul 25, 2008
    14,268
    Amersfoort, The Netherlands, Europe.
    Full Name:
    Mel
    #5 Melvok, Aug 9, 2015
    Photo's please .... :)
     
  6. PFSEX

    PFSEX Formula Junior

    Jun 30, 2006
    843
    Las Vegas
    Full Name:
    John Ratto
    #6 PFSEX, Aug 9, 2015
    ...that someone did this deliberately to flare the fender and create room for wider tires??

    Been know to happen.
     
  7. Bob in Texas

    Bob in Texas F1 Rookie

    Apr 23, 2012
    2,733
    Just East of Weird
    Full Name:
    Bob
    #7 Bob in Texas, Aug 9, 2015
    Post on the Texas board, you'll have your answer as to where to take it.
     
  8. MaranelloDave

    MaranelloDave Formula 3

    Apr 27, 2010
    2,203
    LA
    Full Name:
    Dave
    #8 MaranelloDave, Aug 9, 2015
    As mentioned, without pics, it's hard to give an opinion.
     
  9. Patrnflyr

    Patrnflyr Karting

    Jan 23, 2012
    246
    Lubbock, TX
    #9 Patrnflyr, Aug 9, 2015
  10. jtucker

    jtucker Rookie

    May 16, 2011
    28
    #10 jtucker, Aug 10, 2015
    Sounds like a wheel snag. I experienced a minor level similarity on my 2004 360 when I changed from Pirelli to Bridgestone tires. The Bridgestones, while technically the same size, had just a bit wider shoulder, which snagged the top of the wheel well and pulled down the metal. Very minor and quite common. I live in Dallas and, at the recommendation of Boardwalk Ferrari, took the car to Stuart's. They rolled both wheel wells just a bit and the problem was solved.
     
  11. kurtflies12

    kurtflies12 Karting

    Aug 13, 2015
    64
    Tx
    #11 kurtflies12, Sep 5, 2015
    texas board ???
     
  12. Bob in Texas

    Bob in Texas F1 Rookie

    Apr 23, 2012
    2,733
    Just East of Weird
    Full Name:
    Bob
    #12 Bob in Texas, Sep 6, 2015

Share This Page