Front License Plate without drilling holes

I know this may have been beaten to death about front license plates, drilling holes, not drilling holes etc.

This is not a new idea, but get hold of some 3M Dual Lock mounting strips. My apologies if this has already been posted ...

Image Unavailable, Please Login

Gently bend the front license plate to match the curve of your front bumper. You can even get some kind of plastic frame to hold the plate. But assuming you only have the plate ...

• Clean the area where you would intend to mount the plate.
  
• Cut some squares of the Dual Lock adhesive strips and snap the squares together with the adhesive on the outside.
• Peel the protective strip off one side and stick the Dual Lock squares (about 3 of them) along a longitudinal line along the back of the plate.
• Peel of the protective strip of the Dual Lock squares and prepare to stick on the bumper that you have previously cleaned with some mild alcohol to remove any oil.
  
• Carefully align the plate and press the plate to stick it on the bumper.

Now you can remove the plate easily by lifting apart the Dual Lock and if you ever want to remove the sticky squares, a bit of alcohol and a hair dryer and gently lift the square free of the bumper.

Do a google search for 3M Dual Lock and you can find details and places to buy it.

Steve