Front turn signal lens at Lyle Tanner

I suppose that a few of you have already purchased these; the order took a little longer over the holiday than I expected, but I'm perfectly impressed with the quality and fit--I would have supposed these were OEM lens, not reproductions. about $650 a pair.

I am not affiliated in any way with Lyle Tanner or their supplier...Lee

http://cgi.ebay.com/ebaymotors/Ferrari-400-GT-400i-365-GT4-2-2-Turn-Signal-Lens-Set-_W0QQcmdZViewItemQQhashZitem230d885361QQitemZ150550893409QQptZVintageQ5fCarQ5fTruckQ5fPartsQ5fAccessories

 

Btw, my experience fitting these up;
a. the lens are glued on. PVC cement doesn't work (I tested with the old lens), use epoxy. Before starting any gluing, cover the front of the lens with tape to prevent stray glue from adhering.

b. My spacers (in between the alloy frame of the turn signal assembly and the lens) had corroded and stuck together, getting these apart was some work...re-tap and die both sides once apart, thread is 10x1.25mm

c. the lens fit great, but you will need clamps to compress the top and keep it sealed in the frame. Place a piece of wood over the lens to distribute force across the top.
The screws thru the lens are only for fastening to the body, but are helpful for holding the lens/frame together while gluing.

Voila...!