fuel sending unit | FerrariChat
Buy

fuel sending unit

Discussion in 'Technical Q&A' started by Stephen B., Nov 5, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Stephen B.

    Stephen B. Karting
    Silver Subscribed

    Nov 3, 2018
    104
    Full Name:
    Stephen Bailey
    #1 Stephen B., Nov 5, 2018
    Does anyone know if I can replace the fuel quantity sending unit with the fuel tank installed on my 1975 308 Dino GT4. I've got the unit loose and about half way out but a small tab for the float is preventing removal. The unit wants too come straight out but with tank installed you can't do that. I REALLY don't want to remove the tank, maybe loosen the tank somehow? Thanks for any info.
     
  2. Stephen B.

    Stephen B. Karting
    Silver Subscribed

    Nov 3, 2018
    104
    Full Name:
    Stephen Bailey
    #2 Stephen B., Nov 5, 2018
    Good news I figured it out. You have to bend a little tab on the potentiometer and remove it from the metal part of the unit. Came out ok but going back in with the new one is going to be very tricky. Wish me luck
     
  3. mwr4440

    mwr4440 Five Time F1 World Champ
    Rossa Subscribed

    Jun 8, 2007
    58,055
    Bavaria, The 'Other' Germany
    Full Name:
    Mark W.R.
    #3 mwr4440, Nov 21, 2018
    I don't know about the GT4, but I have read that on the GTB/S, you remove the ignition coils on the driver's side frame and the fuel level sending unit will come right out. If it will 'come right out' it should 'go right back in.'

    Again, have no idea if this translates to the GT4 or not, but it might be worth a shot.
     

Share This Page