Fuse Box Access - High Beams Don't Work | FerrariChat
Buy

Fuse Box Access - High Beams Don't Work

Discussion in '456/550/575' started by markbnj, Sep 20, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. markbnj

    markbnj Karting

    Feb 25, 2007
    62
    Central New Jersey
    #1 markbnj, Sep 20, 2007
    I'm having trouble opening the fuse box panel under the passenger side dash of my 550. Any tricks to opening it up? Neither of my highbeams work, nor does the dash indicator come on. I want to start troubleshooting with the high beam fuses. Any other thots?

    Thanks.
     
  2. dsd

    dsd F1 Rookie
    Owner Silver Subscribed

    Nov 19, 2006
    4,271
    Northern Virginia
    #2 dsd, Sep 21, 2007
    The Panel has two twist lock bolts. Just turn them 90 degrees and they pop out a bit, then just pull. Be careful not to get your finger caught against the underside of the dash (experience here).
     
  3. markbnj

    markbnj Karting

    Feb 25, 2007
    62
    Central New Jersey
    #3 markbnj, Sep 21, 2007
    Fasteners were tight on fuse panel so I used a small hammer to knock them loose. Fuses ok for highbeams. I'll check the bulbs next. After that, I think it's a trip to mechanic to check the switch on the stalk. Any other ideas/suggestions?
     

Share This Page