Garage Space Needed for 348

I just went out to the garage and measured mine outside tip of mirror to outside tip of the other mirror. I get 78 inches, with an allowance for eyeball plumb line. 6.5 feet should give you just enough room to skinny out the partially open door.

 

I used to have a single car garage. One just has to let your passengers out "before" you pull in. Then bias the parking position towards the passenger side.

 

Just stack 'em
Image Unavailable, Please Login

 

Looks like a 348 is 74.6" wide, your garage opening is 96" and the width is 114" minus 2" for the foam...

That's only about 18.5" clearance per side if you're a talented parker (112" minus 75", divide by 2).

I agree with Goth, you're just going to have to let your passenger out first. Those doors are pretty long, and you're going to want to leave yourself enough room to get out on the driver's side without doing a limbo.

If you want to be precise about this, get one of these 348 guys to measure the distance of the rear tip of the door from the car body when it's open to its first detent position.

The foam is a good idea. My 328 is parked in the right bay of a two-car garage, but I always give it wide berth when I pull the Jeep in to the left side - so the Jeep door tends to open (gently!) against the drywall. Not good for a car you care about...

 

I don't know how wide my garage is, but 2 cars fit, passenger must get out prior to me pulling in the garage...
Image Unavailable, Please Login

 

That's a sin to see a Japanese car next to a Ferrari!

What were you thinking?

Fix that problem, Dude!

 

I just laughed at loud when I read your post.
DM

 

Build a bigger garage...........

 

+1. I don't think I could get in and out of the 348 with 18 or even 24 inches of clearance for the door to swing. You might have to rig up some kind of crane to hoist you in and out of the car.
BT

 

Setup a lanyard from the ceiling that hooks onto a chain block&tackle that suspends you from the ceiling and helps you manouver in and out of the 348 in the confined space.

 

Go drive one! You might reconsider

It's No MBZ (that's a plus), I really am enjoying it.

 

True it's not an MBZ but that's no excuse!

No Japanese cars for me, thanks!

Get a 360!

 

Maybe

If the right deal lands on my desk and I can keep the 348.

 

Attention all FChatters:

Would you all please purchase a watch from Chris so he can afford a 360 and we can stop seeing pictures of his Japanese wonder in his garage!!!

 

What's behind the left wall? Couldn't you knock it down or just partially knock it down and rebuild it with maybe with maybe 2 to 3 feet extra garage width.

 

a GTS or spider would also solve that problem
Jurgen

 

Why doesn't he sell both his cars and buy a 360 and a Fiat Punto?

 

Starting with you ? YOu have my number.......DO IT

 

I agree. Not sure why, but the best ones seem bland and then they go downhill from there...

Finally, a worthy cause to rally around!

 

So true!! Chris even made sure he got "all" of the Japanese car in the pic and only "part" of the 348 LOL

 

LOL!

That pic was for the G35, not the 348 .

Someone wanted to see the color or something, I don't remember.

Even "part" of the 348 is hot looking

 

You got that right brother!

 

Ok so Chris is giving an extra 5% off to everyone who buys a watch from him by the ides of march, and he'll pay the postage1

Please do it today so Chris can sell that Japanese excuse for a car and give his Italian model a garage mate!

 

so far Mr. Calo, no sales from your idea