glove box on a series 1 308 gt4

There is only one way to do it. In the glove box there are side panels. Remove them and you will expose the bolts.
If you look at the Tav it shows everything


http://www.ferrparts.com/images/tavs/308GT4E_115.jpg

 

I did mine over 10 years ago. If I remember correctly, it was just a matter of drilling out a couple rivets on the latch that closes the glove box. I can take a look at it later, but if I had to guess its part #10 on the diagram attached above.

 

Yep, I was right. Here's a pic of mine. Just drill out the rivets, recover (I did mine in leather), then rivet it back on.
Image Unavailable, Please Login

 

No, I didn't do the dash. I understand it's a lot of work to pull out the dash.

Here's a pic of my interior.
Image Unavailable, Please Login