Grease recommendations | FerrariChat
Buy

Grease recommendations

Discussion in '308/328' started by 911rcr, Oct 26, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 911rcr

    911rcr Karting

    Feb 4, 2008
    185
    Northern VA
    Full Name:
    Alex
    #1 911rcr, Oct 26, 2010
    I am servicing my 1980 GTBi this weekend and wanted to hit all the grease fittings.

    I hope the opinions on recommended grease aren't as vast as they are on motor oil!!

    All opinions are appreciated though!!

    Thanks!
     
  2. mike996

    mike996 F1 Veteran

    Jun 14, 2008
    6,875
    Full Name:
    Mike 996
    #2 mike996, Oct 26, 2010
    Grease meeting NLGI 2 is the most common grease used on cars for everything from wheel bearings to door hinges. Of course you can get it in synthetic versions as well...
     
  3. shawxhurst

    shawxhurst Formula Junior

    Nov 6, 2006
    672
    San Diego
    Full Name:
    Steve Hawxhurst
    #3 shawxhurst, Oct 26, 2010
    The only grease fittings I'm aware of on my 85QV are the door hinge pins. Where are others?
     
  4. 911rcr

    911rcr Karting

    Feb 4, 2008
    185
    Northern VA
    Full Name:
    Alex
    #4 911rcr, Oct 26, 2010
    I know of at least one on the steering column u-joint for sure. I thought I saw them on the ball joints and tie rod ends but may have been mistaken.
     

Share This Page