GTC Build Sheet - to share info from | FerrariChat

GTC Build Sheet - to share info from

Discussion in 'Vintage (thru 365 GTC4)' started by enio45, Aug 7, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. enio45

    enio45 Formula 3
    Rossa Subscribed

    May 16, 2004
    1,533
    Gilbert, AZ
    Full Name:
    Ed
    Anyone have a GTC build sheet they can share with me that is around serial number 10061?

    I am interested in some of the detail parts used at this build time as we are restoring this GTC.

    Appreciate any consideration to this.
     
  2. 10speed

    10speed Rookie

    Sep 18, 2013
    18
    There is a 330 GTC/GTS As Built Configuration and Judging manual on the FCA National web site. There are build sheets in that manual. Go to the Community TAB, then the IAC/PFA TAB to find the manual. The manual will also help you with your restoration process.
     
  3. amerikalei

    amerikalei Karting

    May 23, 2011
    196
    Very interesting, clearly a labor of love. Wish there were similar manuals for the 250 GT Pininfarina and GTE models.
     
  4. enio45

    enio45 Formula 3
    Rossa Subscribed

    May 16, 2004
    1,533
    Gilbert, AZ
    Full Name:
    Ed
    10speed, thank you for the info -

    yes I'm familiar with the As-Built configuration book by Clete - an amazing and well done guide. There are one or two build sheets in the book as well.

    what I'm attempting to find is one around the same serial number of my clients car - so that i can be more certain
    of the correct parts are used. With the evolution of the GTC during production, tying the parts to the build /vin number
    will help me get it correct.

    One F-chatter has provided me a build sheet from one of his cars, but it is late 105xx - good reference but a little on the late side.

    Thanks again.....Eddie
     
  5. maserich

    maserich Karting

    Mar 13, 2008
    169
    I am trying to identify a trans, driveshaft, and rear axle assy..
    can you give me the driveshaft length please?
     
  6. Bob Zambelli

    Bob Zambelli F1 Rookie
    Rossa Subscribed Silver Subscribed

    Nov 3, 2003
    3,492
    Manning, SC
    Full Name:
    Robert G. Zambelli
    ???????????
     
  7. maserich

    maserich Karting

    Mar 13, 2008
    169
    Oh..Sorry
    That question was about a 330 GTC restoration.
    I have a trans, driveshaft and rear axle assy from some sort of 330GT(?) and thought the driveshaft could identify if came from a GT or GTC,S.
     
  8. TTR

    TTR F1 Veteran
    Rossa Subscribed

    Mar 29, 2007
    5,137
    Riverside, CA
    Full Name:
    Timo
    Likely from GT.
    GTC/-S, if I'm not mistaken, came with transaxles.
    Doesn't your trans & rear axle housings have assembly numbers ?
     

Share This Page