GTE owners please check | FerrariChat

GTE owners please check

Discussion in 'Vintage (thru 365 GTC4)' started by AndruetBiche, Mar 1, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. AndruetBiche

    AndruetBiche Formula Junior

    Joined:
    Oct 7, 2006
    Messages:
    427
    Noticed the Securit glass marking on the passenger rear vent window can be read from the outside but the drivers side can only be read from the inside. Has mine been replaced at some point with another passenger side or are all GTEs this way?
     
  2. FarEastFerrari

    FarEastFerrari Formula Junior

    Joined:
    Jan 27, 2014
    Messages:
    433
    Location:
    Hong Kong, LA & NY
    Full Name:
    Thomas Choi
    the photo?
     
  3. AndruetBiche

    AndruetBiche Formula Junior

    Joined:
    Oct 7, 2006
    Messages:
    427
  4. daytonaman

    daytonaman Formula Junior

    Joined:
    May 1, 2007
    Messages:
    986
    Location:
    Australia
    Full Name:
    howard pigdon
    330 gt's are like that too
    Exact same piece of glass used left or right
     
  5. daytonaman

    daytonaman Formula Junior

    Joined:
    May 1, 2007
    Messages:
    986
    Location:
    Australia
    Full Name:
    howard pigdon
    same with door glass and 1/4 vents
     
  6. AndruetBiche

    AndruetBiche Formula Junior

    Joined:
    Oct 7, 2006
    Messages:
    427
    Thanks.
    sn2831
     
  7. John Vardanian

    John Vardanian F1 Rookie

    Joined:
    Jul 1, 2004
    Messages:
    3,080
    Location:
    San Francisco Area
    Full Name:
    John Vardanian
    Mine has the same situation. These are flat glass and it is possible that they were made out of one manufacturing jig; i.e., one for both sides.

    john
     

Share This Page