Hardware to attach distributors 308GT4 | FerrariChat
Buy

Hardware to attach distributors 308GT4

Discussion in '308/328' started by kiwiokie, Feb 4, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. kiwiokie

    kiwiokie Formula 3

    Aug 19, 2013
    1,539
    Tulsa, OK
    Full Name:
    John McDermott
    #1 kiwiokie, Feb 4, 2018
    Reached a road block in assembling my 308GT4 engine - dont seem to have any hardware to attach the distributors to the cylinder heads. Before anyone chimes in that I should have bagged and labeled on disassembly the engine was apart when I bought the car. The parts manual appears to show two studs and one bolt but it is hard to tell. It looks Iike on TAV 5 16043611 is the bolt, 13517011 is a short stud and 13517211 is a long stud. Can anyone confirm? If someone has their engine apart can you tell me the length of each? Cheers, John
     
  2. absostone

    absostone F1 World Champ
    Silver Subscribed

    Jul 28, 2008
    10,079
    #2 absostone, Feb 5, 2018
    That sux. But I think that will be a easy fix to get some metric studs and bolt from a hardware store. Find a bolt that fits into the head and mark the depth ,then add for the depth of the dizzy plate ,plus nut, plus a 1/4" extra to stick out past the nut
     
  3. John F

    John F Rookie

    Jun 24, 2010
    41
    East Lothian, UK
    Full Name:
    John Ferguson
    #3 John F, Feb 6, 2018
    ME308 and NoGoSlow like this.
  4. absostone

    absostone F1 World Champ
    Silver Subscribed

    Jul 28, 2008
    10,079
    #4 absostone, Feb 6, 2018
    Nice shot
     
  5. kiwiokie

    kiwiokie Formula 3

    Aug 19, 2013
    1,539
    Tulsa, OK
    Full Name:
    John McDermott
    #5 kiwiokie, Feb 6, 2018
    Thanks very much John! Exactly what I needed.
     

Share This Page