Has anyone replaced their ancillary belt themselves by chance on the FF | FerrariChat
Buy

Has anyone replaced their ancillary belt themselves by chance on the FF

Discussion in 'FF/Lusso' started by carguy007, Sep 22, 2024.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. carguy007

    carguy007 Formula Junior

    Apr 24, 2013
    889
    #1 carguy007, Sep 22, 2024
    Has anyone replaced their ancillary belt themselves by chance on the FF? There does not look like there is much room and would need to remove the cross-member. I am just looking for guidance on anyone that's successfully done it.
     
  2. carguy007

    carguy007 Formula Junior

    Apr 24, 2013
    889
    #2 carguy007, Sep 22, 2024
    Well this is definitely one of the more involving belt changes I have done. The intakes, ecu and a cross member need to come out to get this done. Fun times. Going to also do the tensioner while I am in there and hope I don't have to repeat this until another 50k miles.
     
    ANOpax likes this.
  3. sfcarguy

    sfcarguy Formula Junior
    Rossa Subscribed

    Mar 9, 2018
    525
    Earth
    #3 sfcarguy, Sep 23, 2024
    Just looked through the WSM. Kudos to you. It looks like a total b**** of a job.
     
  4. carguy007

    carguy007 Formula Junior

    Apr 24, 2013
    889
    #4 carguy007, Sep 26, 2024
    It is indeed a *****. Just got to the belt and tensioner. It was much harder job than I anticipated and I am not even done. I would hate to see what Ferrari would charge for it and the carnage they would likely leave behind. I am curious if it would be possible to get it on from the bottom. It would be a bit of an art but much easier I think then what I did.
     

Share This Page