430 - Headlight holder changeout…. | FerrariChat
Buy

430 Headlight holder changeout….

Discussion in '360/430' started by Mjzinno, Dec 4, 2022.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Mjzinno

    Mjzinno Karting

    Jul 12, 2021
    56
    Full Name:
    M Zinno
    #1 Mjzinno, Dec 4, 2022
    I got the head light assemblies off and now it seems there is a sealant over the plastic covers that needs to be removed in order to change the holders to carbon fiber. Anyone have a proven easy way to separate these and prevent damage and what to use to seal them up after changing them out? Thx! Matt
     
  2. LorenzoR

    LorenzoR F1 Rookie
    Rossa Subscribed

    Sep 26, 2015
    3,183
    Sarasota Fl/Pittsburgh
    #2 LorenzoR, Dec 4, 2022
    Matt, I think you gotta heat them in the oven to separate But double check me. and I also believe there a diy thread on these. Maybe you tube?
     
  3. mike32

    mike32 F1 Veteran

    May 13, 2016
    5,962
    Isle of man- uk
    #3 mike32, Dec 5, 2022
    You can buy a silicon sealer remover from a local diy shop, try a tiny bit to see if it works
     

Share This Page