Hi Fellow Ferrari enthousiasts! I have made heat sleeves around almost all coolant lines and electrical lines around the exhaust. This will protect the hoses, but also will keep the engine cooler. If enough people are intersted, I will make them in series. Jasper Image Unavailable, Please Login Image Unavailable, Please Login
They can be mounted without removing any clamps, because they have poppers. The photo's below is a specimen which was made for a lamborghini for over a sensor which tends to melt... This helped a lot. Image Unavailable, Please Login Image Unavailable, Please Login
these sleeves are made for another OEM in series ( not Ferrari) . I have fitted all the hoses near the exhaust . just post here is anyone likes this, price range 45 dollar per sleeve. THE more people are interested the cheaper it gets!!
Here are some sleeves used for coolant hose and electrical wires Image Unavailable, Please Login Image Unavailable, Please Login
No, These are completely closed, specially for the coolant hose, the electrical will be fitted with poppers.
This is a very usefull product. Whats is the black insulation material inside the aluminized covering? What is the thermal temperature rating? (I have seen some commercial sleeves that use high temp fiberglass cloth bonded on the inside of the aluminized material and if memory serves..... the temperature rating was around 1200 degrees F.)
Isn't this available as generic sleeve material that can be bought in bulk rolls? For Example... http://www.heatshieldproducts.com/productdetail/thermal-and-heat-protective-sleeving/thermaflect-sleeve-sewn/60/23
