Heater/coolant hoses plain hose or OEM type molded ones? | FerrariChat
Buy

Heater/coolant hoses plain hose or OEM type molded ones?

Discussion in '308/328' started by JMNGTB, May 24, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. JMNGTB

    JMNGTB Rookie

    Dec 25, 2008
    48
    #1 JMNGTB, May 24, 2013
    Gotta replace the heater hoses under the front lid. Regular good quality coolent hose, or molded type OEM ones. Any one done this before? Happy Friday, cheers to the military. John
     
  2. Dr Kananga

    Dr Kananga Formula 3

    Apr 20, 2011
    1,222
    Los Angeles, CA
    Full Name:
    Buonapart I. Gallia
    #2 Dr Kananga, May 25, 2013
    Gates Green Stripe seems to be whatever everyone enjoys using.
    I used it.
     
  3. finnerty

    finnerty F1 World Champ

    May 18, 2004
    10,406
    #3 finnerty, May 25, 2013
    I did mine in silicone ---- aftermarket, generic, high quality, order-by-the-foot, material.

    Cheaper than OEM, but a bit more expensive than the various aftermarket Green / Yellow / White stripe that many have been using ---- and, will outlast either by about 20 years ;).

    Unless I have an accidental puncture / cut, I do not anticipate ever having to replace them again :).
     

Share This Page