Heater hose question | FerrariChat

Heater hose question

Discussion in '206/246' started by simonc, Jan 22, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. simonc

    simonc Formula Junior

    Joined:
    Nov 1, 2003
    Messages:
    884
    Location:
    Herfordshire, UK
    Full Name:
    Simon Campbell
    I had a small leak from the T-piece that connects from the engine T-piece near the header tank to the heater (Tav 14, item 32). I removed the T-piece and it is badly corroded so I will order a new one from Superformance.

    However the hose to the heater is a bit strange. It looks like normal heater hose from the outside but from the inside the internal diameter is only about 12mm and the walls are very thick. Is this normal or has someone fitted some strange type of hose, or is there another reason. I have never seen a hose like this. It is just rubber with a woven cloth layer but the inside rubber is very soft and almost crumbly.

    Simon
    Image Unavailable, Please Login
     
    Last edited by a moderator: Sep 7, 2017
    simonc, Jan 22, 2011
    #1
  2. dm_n_stuff

    dm_n_stuff Four Time F1 World Champ Lifetime Rossa Owner

    Joined:
    Dec 10, 2003
    Messages:
    43,744
    Location:
    26.806311,-81.755805
    Full Name:
    Dave M.
    I dunno what it is supposed to look like, but I bet that isn't it.

    While you have it apart, why not order that part too?

    Hell, what's another $70,000 (Give or take) in parts, right?

    OK, $70K is an exaggeration, it's probably not more than $150.

    D
     
    dm_n_stuff, Jan 22, 2011
    #2
  3. Pantdino

    Pantdino Formula 3

    Joined:
    Jan 13, 2004
    Messages:
    2,069
    Full Name:
    Jim
    my guess would be that the hose is failing-- looks like the inside surface has swollen and is disintegrating.
     
    Pantdino, Jan 22, 2011
    #3

Share This Page