Help! 355 clutch replacement | FerrariChat
Buy

Help! 355 clutch replacement

Discussion in '348/355' started by ferrarimike63, Aug 16, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. ferrarimike63

    ferrarimike63 Rookie

    Jul 3, 2013
    18
    #1 ferrarimike63, Aug 16, 2014
    Any tech tips on main shaft triple seal replacement ? I also need torque specs for ring nut , flywheel , main shaft 6mm allen , etc . I may be a total idiot and don't know how to use this forum , but I cant seem to find the info to put my baby back on the road .
     
  2. greyboxer

    greyboxer F1 World Champ

    Dec 8, 2004
    12,665
    South East
    Full Name:
    Jimmie
    #2 greyboxer, Aug 16, 2014
    At the top of the section is sticky grouping - in there is a 355 area - in there is a clutch change procedure - any help ?

    You might alos be able to find some info in the workshop manual at All Ferraris

    And yes as you anticipate you'll gradually come to realise most questions have been asked before so there probably is an answer somewhere here
     
  3. ferrarimike63

    ferrarimike63 Rookie

    Jul 3, 2013
    18
    #3 ferrarimike63, Aug 16, 2014
    Thanks , I will check it out . I just got back from Ferrari of Denver and Derrick is going to get me the info on Monday . I hope I can find it before Monday , Thanks again for the reply!
     
  4. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    13,558
    San Carlos, CA
    Full Name:
    Mitchell Le
    #4 yelcab, Aug 16, 2014
    Ring nut to clutch shaft, 235 Nm
    Ring nut on right main shaft, 235 Nm
    Ring nut on left main shaft, 235 Nm
    Ring nut on secondary shaft, 235 Nm

    Damper Fly Wheel nuts, M25, 206 Nm
     
  5. ferrarimike63

    ferrarimike63 Rookie

    Jul 3, 2013
    18
    #5 ferrarimike63, Aug 16, 2014
    Thanks for the info !
     

Share This Page