Help! Desperate for E-Diff solenoid for F430 | FerrariChat

Help! Desperate for E-Diff solenoid for F430

Discussion in '360/430' started by Inxidious, Jan 9, 2017.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Inxidious

    Inxidious Rookie

    Jul 29, 2016
    7
    Hi there,

    My 2007 F430 coupe is undrivable due to the "SLOW DOWN" and E-Diff lights going off and the gear going into neutral and am unable to shift gear after that. I have almost got into an accident because of this fault.

    I live in Singapore and am desperately trying to source for the E-Diff solenoid which I understand is the usual suspect for this issue.

    Could any kind soul please direct me to a supplier who could ship this to me? Preferably somewhere with a phone number I could call.

    Thank you in advance!!
     
  2. efg2014

    efg2014 Formula Junior

    Sep 14, 2014
    657
    Northern California
    Sorry to hear about your problem. You should take the car to a Ferrari shop so they can pinpoint the issue. Guessing it is the solenoid is not the approach I would recommend. What if it isn't the solenoid?
     
  3. Bob in Texas

    Bob in Texas F1 Rookie

    Apr 23, 2012
    2,733
    Just East of Weird
    Full Name:
    Bob
    What efg said...
    You can go to our site sponsor Ricambi for the part (ricambi america).
    On the other hand, you don't want to throw in parts without knowing exactly what is wrong, that can get expensive. A proper diagnosis with an SD2/3 is in order.
     
  4. scuderia09

    scuderia09 Formula 3
    BANNED

    Sep 6, 2007
    1,045
    You have to scan the car, is the slow down red or amber, it could be F1 pump losing pressure, Ediff.pressure valve and switch, or even clutch you need to know the percentage of clutch wear,
     
  5. greyboxer

    greyboxer F1 World Champ

    Dec 8, 2004
    12,666
    South East
    Full Name:
    Jimmie
    For Singapore you could try Official UK Maranello Classic Parts +44 784 436 222

    But as everyone else says it could be something else eg clutch or hydraulic pressure
     
  6. Turbotuner20v

    Turbotuner20v Formula Junior

    Mar 18, 2014
    362
    That selonoid needs very specific torque when installed so be aware when you install since it seems to be a tough part for you to source
     
  7. steelej

    steelej Formula Junior

    Jan 15, 2007
    433
    UK
    it needs to be 9NM.

    John.
     
  8. jlonmark

    jlonmark F1 Rookie

    Mar 29, 2005
    3,203
    Beverly Hills, CA
    Full Name:
    Jay
    I had the same problem in my 05 and they wanted $25k for a new F1 system. I traded it in on a new one
     

Share This Page