Help identifying Ferrari Tool kit/bag | FerrariChat

Help identifying Ferrari Tool kit/bag

Discussion in 'Ferrari Discussion (not model specific)' started by FerrfanFL, Apr 26, 2024.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. FerrfanFL

    FerrfanFL Formula 3
    Rossa Subscribed

    Feb 8, 2021
    2,258
    Florida
    Full Name:
    Ara
    Hey fellas,
    Recently bought a boat load of Ferrari luggage and tool kits from a woman local to me whose husband owned a Ferrari dealership decades ago. I want to keep many of the items, but have no use for a few items. She had a lot of items. I bought them all. Would supremely appreciate any help in identifying this tool bag to start with. From what I am seeing, it appears to be a TR tool bag. The 348/355 bags seem to have snaps at the top of the bag to secure the lid, and the TR's have the leather strap that sleeves through. Any thoughts would be appreciated. Will likely sell, but I certainly want to advertise it accurately.
    Thanks in advance fellas.
    Regards
    Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
     
  2. greyboxer

    greyboxer F1 World Champ

    Dec 8, 2004
    12,671
    South East
    Full Name:
    Jimmie
    There should be a part number on the belt and an expiry date on the puncture aerosol which could help but my recollection is the 355 had an early and a late shaped tool kit - from your photo it is unclear if it is relatively square shaped or taller - either way one tray seems missing with pliers etc - also TR & 355 both had the slide in closure shown
     
  3. FerrfanFL

    FerrfanFL Formula 3
    Rossa Subscribed

    Feb 8, 2021
    2,258
    Florida
    Full Name:
    Ara
    i don't think it's missing pliers. am not seeing where pliers would go in the set. I'll check the date of the belt. Thanks. Any more info is welcomed. Thanks again. Missng only one wrench it seems.
     
  4. SF1000

    SF1000 Karting

    Very interesting find
     
  5. Billveloce

    Billveloce Rookie

    Dec 17, 2023
    27
    Full Name:
    Nabil kabbani
    There should be three trays in there. It appears there are only two here.


    Sent from my iPhone using FerrariChat
     
  6. FerrfanFL

    FerrfanFL Formula 3
    Rossa Subscribed

    Feb 8, 2021
    2,258
    Florida
    Full Name:
    Ara
    No, there is NO room for another tray. When the tire inflator is in, with the trays, there's not an inch left for another tray.
     
  7. Billveloce

    Billveloce Rookie

    Dec 17, 2023
    27
    Full Name:
    Nabil kabbani
    Image Unavailable, Please Login
    This would be the other tray along with the ratchet one. I could be wrong, but the inflator does not go in the case. It sits separate and that other tray with pliers and screw drivers goes in the case.


    Sent from my iPhone using FerrariChat
     
  8. Rifledriver

    Rifledriver Three Time F1 World Champ

    Apr 29, 2004
    37,122
    Cowboy Capitol of the World
    Full Name:
    Brian Crall
    A really good place to start is the parts book. It has a detailed picture of what kit came with the car and what was included.
     
  9. FerrfanFL

    FerrfanFL Formula 3
    Rossa Subscribed

    Feb 8, 2021
    2,258
    Florida
    Full Name:
    Ara
    you may be right. see the pic attached from a 355. The tire inflator from this kit goes with the other tool kit i have asked the community to help to identify with the leather strap (which I have) that secures both the tire inflator and the tool kit. So the tire inflator and the other tool kit are for a 355 and this kit is for a TR.
    Image Unavailable, Please Login
     
  10. FerrfanFL

    FerrfanFL Formula 3
    Rossa Subscribed

    Feb 8, 2021
    2,258
    Florida
    Full Name:
    Ara
  11. FerrfanFL

    FerrfanFL Formula 3
    Rossa Subscribed

    Feb 8, 2021
    2,258
    Florida
    Full Name:
    Ara
    So now that we've discerned the tool kit is for a TR, any ideas on value? Anyone? Thanks in advance...
     

Share This Page