Help locating water hose #199505 | FerrariChat

Help locating water hose #199505

Discussion in '612/599' started by scottmc, Sep 30, 2024.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. scottmc

    scottmc Rookie

    Aug 16, 2020
    17
    La Quinta Ca
    Full Name:
    scott mcclean
    Hoping someone can help me find a replacement hose. It is for a 612 and is located under the manifold. I have searched everywhere but no luck. Ferrari doesn’t make anymore and there aren’t any in the dealership network in the US. Any help locating one would be greatly appreciated. Thanks!
     
  2. jimshadow

    jimshadow F1 Veteran
    Lifetime Rossa Owner

    Feb 19, 2006
    6,090
    Indiana/North Carolina
    Full Name:
    JIM
  3. scottmc

    scottmc Rookie

    Aug 16, 2020
    17
    La Quinta Ca
    Full Name:
    scott mcclean
    Thanks for the reply. Unfortunately, yes. I’ve also tried Ferrparts, Eurospares, Ricambi, Ferrariparts, AWItalian and others that I can’t remember. Everyone says the same thing; no longer available.
     
  4. greyboxer

    greyboxer F1 World Champ

    Dec 8, 2004
    12,471
    South East
    Full Name:
    Jimmie
    Query : OP says water hose but parts shows refrigerant - - thw water pipe in the manifold must be a more standard part eg 575 ?
     
  5. Chindit

    Chindit Formula Junior
    Owner Silver Subscribed

    Oct 18, 2008
    260
    Navarre, Florida
    Full Name:
    Nick P.
    Yeah, the "candy cane" hose... that is going to be a problem. I replaced that hose on my 612 about a year and a half ago. I searched extensively / worldwide before I was able to locate one in stock at Miller Motorcars. A kind gentleman there named Lonnie helped me out by identifying the part and sending it to me. At that time, I felt like I must have found the last one available anywhere in the world! My advice is to start calling or emailing the parts department and/or service manager at every Ferrari dealership you can find (start with Lonnie from Miller Motorcars) and ask for advice regarding where that part can be found. Hopefully some leads will develop that will point you in the right direction. If my memory is correct, I did contact Ferrari North America, and I think they were able to see that Miller Motorcars had one in stock.

    On a side note, there are a few aftermarket hose manufactures out there that can custom-fabricate high-temp neoprene hoses with complicated bends. as a worst case scenario, you may be able to have one fabricated. A single hose probably won't be cheap but a limited production run might be worth it...with potential customers to be found in the Ferrari V-12 community. Scuderia Rampante may be able to help you out there. I think the same hose part number may have been used on 456, 550, and 575. Good luck with your search and please let us know how you made out.
     
  6. George Vosburgh

    George Vosburgh F1 Rookie
    Silver Subscribed

    I've had good luck in the past with the Florida dealers having parts no one else has.
     
  7. scottmc

    scottmc Rookie

    Aug 16, 2020
    17
    La Quinta Ca
    Full Name:
    scott mcclean
    Thanks everyone for your responses. My mechanic has found someone who can fabricate a replacement for me. Don’t know the price yet. I’m sure it won’t be cheap, but I really don’t care as long as it works and lasts. I post updates after I get her back.
     
    Chindit and George Vosburgh like this.
  8. Mickey Bharat

    Mickey Bharat Formula Junior

    Jul 4, 2019
    258
    Cotati, California
    Full Name:
    Mickey Bharat
    Try Exotic Auto Recycle you might get a good used one. https://exoticautorecycling.com/ Tel +1 916 638 8000
     
  9. DouglasNg

    DouglasNg Formula 3

    Jun 6, 2004
    1,023
    SG
    Full Name:
    Douglas
    Skidkid and Chindit like this.
  10. Skidkid

    Skidkid F1 Veteran
    Owner Rossa Subscribed

    Aug 25, 2005
    9,347
    Campbell, CA
    Full Name:
    John Zornes
    Looks great BUT the copper will erode the aluminum, read the block.
     

Share This Page