Help me find a proper oil cap | FerrariChat
Buy

Help me find a proper oil cap

Discussion in '308/328' started by LiquidRetro, May 16, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. LiquidRetro

    LiquidRetro Rookie

    Apr 5, 2007
    14
    Lincoln Nebraska
    #1 LiquidRetro, May 16, 2007
    When my dad acquired the 78 308 it came with an aftermarket Elderbrock oil cap. This cap is only held in with a rubber gasket and you just pullet it off. It works to keep oil in the engine but we think that we are not getting the proper oil pressure with this aftermarket cap. I am wondering if someone knows where I could get something for a reasonable cost that will fit and allow the proper pressure to be obtained. Thanks in advance.
     
  2. miketuason

    miketuason F1 World Champ
    Owner Silver Subscribed

    Feb 24, 2006
    15,819
    Cerritos, CA.
    Full Name:
    Mike
    #2 miketuason, May 16, 2007
    The proper oil cap for the 308/328s are the same as fiat. or call Daniel at Ricambi or T-Rutland
    The oil cap shouldn't have anything to do with the oil pressure, as the valve cover isn't really that pressurize.
     
  3. dfratini

    dfratini Karting
    Silver Subscribed

    Dec 31, 2003
    154
    Spokane, WA
    Full Name:
    Daniel Fratini
    #3 dfratini, May 16, 2007
    the "problem" with your oil pressure is most probably the sending unit. They tend go go bad in 308 / 328 models.

    replacement is not all that expensive.
     

Share This Page