Help, need a 2nd/3rd gear selector for the gearbox | FerrariChat
Buy

Help, need a 2nd/3rd gear selector for the gearbox

Discussion in '206/246' started by alhbln, Apr 27, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. alhbln

    alhbln Formula 3
    Consultant Owner

    Mar 4, 2008
    1,749
    Berlin, Germany
    Full Name:
    Adrian
    #1 alhbln, Apr 27, 2011
    Gearbox has been disassembled and the selector forks are so worn they need to be replaced, bad news i presume. Superformance has the 4th/5th selector fork, but not the 2nd/3rd one and Ferrari does not seem to be able to supply any of these. Any idea where to get one?
    Also looking for news synchro sliders for 2nd/3rd and 4th/5th.

    Thanks,
    Adrian
    #02600
     
  2. snowric

    snowric Karting

    Apr 15, 2009
    90
    UK
    Full Name:
    Richard Snow
    #2 snowric, Apr 27, 2011
    Eurospares claims to have 2/3rd gear selector for an E series 'in stocl' price is c £80.

    I didn't check on the synchros.

    Richard
     
  3. Dino Club Germany

    Dino Club Germany Formula Junior

    Nov 10, 2008
    549
    Germany
    Full Name:
    N. Schumacher
    #3 Dino Club Germany, Apr 27, 2011
    Adrian, have you asked J.M. from Koblenz?
    regards
    Nicolai
     
  4. alhbln

    alhbln Formula 3
    Consultant Owner

    Mar 4, 2008
    1,749
    Berlin, Germany
    Full Name:
    Adrian
    #4 alhbln, Apr 28, 2011
    Richard, thanks, looks good! 607E-523956 seems to be the right one for my Dino build 12/71, will have a look.

    Nicolas, i don't have the contact details of Jürgen, will get back to you when the Eurospares part turn out to be the wrong ones.

    Thanks for the quick help!
    Adrian
     
  5. alhbln

    alhbln Formula 3
    Consultant Owner

    Mar 4, 2008
    1,749
    Berlin, Germany
    Full Name:
    Adrian
    #5 alhbln, May 4, 2011
    Ron, my engine builder, talked to Eurospares but unfortunately they don't have them in stock, something was wrong with what their supplier send as it seems.

    I also need new sliders, would be very happy for any hint/input about possible sources for the selector and sliders. Gearbox stuff is a bit over my head to say the least.

    Cheers,
    Adrian
     
  6. swift53

    swift53 F1 Veteran
    Rossa Subscribed

    Nov 17, 2007
    8,304
    E.S.
    Full Name:
    Alberto
    #6 swift53, May 4, 2011
    Adrian, I have a spare Trans-axle that I have used for parts, yet ignore if it is an M or an E.
    Can you post photos of exactly what you need?

    Regards, Alberto
     
  7. alhbln

    alhbln Formula 3
    Consultant Owner

    Mar 4, 2008
    1,749
    Berlin, Germany
    Full Name:
    Adrian
    #7 alhbln, May 5, 2011
    Alberto, thanks for the offer! I thought i need a 13mm selector for 2nd/3rd but got an update from my engine builder today that the spider in the centre of the slider can be replaced and is available, which might fix the problem. Thanks again, i'll keep you in the loop.
     
  8. snowric

    snowric Karting

    Apr 15, 2009
    90
    UK
    Full Name:
    Richard Snow
    #8 snowric, May 10, 2011
    Dis Eurospares supply the correct part ?

    Snowy
     
  9. alhbln

    alhbln Formula 3
    Consultant Owner

    Mar 4, 2008
    1,749
    Berlin, Germany
    Full Name:
    Adrian
    #9 alhbln, May 10, 2011
    No, Ron told me that Eurospares had a problem with their supplier as the current batch is 'unusable' (repeating Ron's words here). The good news is that Ron could rebuild my existing fork, so with a bit of luck i'm good (will know the next days).

    Cheers,
    Adrian
     

Share This Page