( HELP ) where to get 360 Challenge Stradale front bumper?

Direct replacement to OEM but not sure changing the front only is smart.

They are lower so will look odd vs std side skirts and rear bumper, also messes with the downforce.

Image Unavailable, Please Login

I did mine all round and makes a huge difference to the look !

Contact Mike at Prosport Ferrari.

Be careful, the start of a CS conversion is a slippy and expensive route !!! Trust me I know !!! ;-))

 

There was one for sale on Craigslist in Orange county. He wanted $1,000 for with the Challenge grills. The listing has expired but his contact number is:
Sent from my iPhone
+1 714 343 8000 USA
+ 61 448820780 Australia

He may still have it.

 

Here you go........

Ferrari 360 Challenge Stradale Front Bumper New reproduced P N 64861610 | eBay

Ferrari 360 Challenge Stradale Rear Bumper New P N 67779510 | eBay

and while you are at it....


http://www.ebay.com/itm/Ferrari-360-Challenge-Stradale-RH-Rocker-Panel-Side-Skirt-New-P-N-67361010-/300896159733?pt=Motors_Car_Truck_Parts_Accessories&hash=item460ecf07f5&vxp=mtr

http://www.ebay.com/itm/Ferrari-360-Challenge-Stradale-LH-Rocker-Panel-Side-Skirt-New-P-N-67361110-/300577410468?pt=Motors_Car_Truck_Parts_Accessories&hash=item45fbcf4da4&vxp=mtr


When all is said and done, you may be better off buying a CS! Have fun!

 

That bumper has been sold.

 

Contact "anxpert" on this forum. He makes pieces that can be applied to your bumper giving it the look of the stradale bumper. He also makes side skirts that resemble the stradale as well.

 

Second that "anxpert." I installed the rockers as well as bumper conversion. Looked great.
It is using the stock bumper and bonding the spoilers to it . More labor , but much lower price . Benefit vs. aftermarket is maintaining the original bumper and fit .

 

Interesting.. do you have some result pics?

 

Whenever I see a front only bumper replacement my first thought is "Front end collision".

 

Here is my 360 with anexperts bumpers parts and rockers installed
Image Unavailable, Please Login
Image Unavailable, Please Login

 

Here are some pics of rockers and bumper conversion I purchased from " anexpert."
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login

 

Looks good, thanks for the pictures.

 

go with the stuff from anxpert. his pricing is insanely good and many people recommend his stuff. if he were closer to me i'd buy it all and have him do the work.

 

A little late to the party on seeing this post, but myself and my Father (anxpert) are glad to help anyone with this conversion!

Also, thank you all for the nice compliments and super cool photos! We love seeing the end results.

Best regards!
Enrique Allen Mar

 

Hi Enrique, Can you still supply these kits?

Thanks.

 

Hi Excursion,

Give me a call anytime, my mobile number is 1.760.586.7578 or my email is [email protected]

 

That looks great. Could you tell me if the underside of the outermost flared out portions of the front bumper are flat where I’d be able to mount some thin protective metal for scrapes? Thank you!

 

There are a few companies out there that sell skid plates for the CS bumper. Some for as little as $100. I would think that any of those would work just fine with this bumper, any other reproduction and for sure OEM. Im looking to buy a set of skid plates soon too.

 

Hey Enrique,
Just joined this forum... Still available for CS bumper conversion for 360s?

Alejandro

 

Since this thread is over 10 years old and the poster you referenced only had six posts, you'd likely do better just calling the number or emailing him.

 

Makes total sense! Just emailed him directly. Hopefully, I can connect. Thank you!

 

Pm me i may be able to help you.
Cheers