re. 98 spec GTA (euro) (no OBD port) I've been asked by a 456 owner to help identify and locate some connectors. 1. Connectors They are all in the fuse box area, connectors 1 thru 6 as in the picture. 2. Where are the Engine ECU diagnostic cables ? thks. View attachment 2514307
Hi Angus, An old thread, no solutions except the factory SD-1. https://www.ferrarichat.com/forum/threads/obd-for-456.307382/ Although I have a FIAT lead for some of the ECU's. I find it hard to believe no-one has made a modern solution for the diagnostics on these cars, I guess there are too few of them. The engine ECU's have their independent connectors right next to the boxes, like shown in the photos in that thread. The black connectors with the blue finishers. How to read them is another info. The factory WSM has a lot of info if you can figure out how to hook up the wires/connectors. Cheers!
He has access to a Leonardo, with 456 model support And there is a cable that has 2 x 3pin connectors (they are slightly different to each other). Plus the two cables are label 1 & 2 - no other info came from Accinni apparently. Item 6 = Is this the test lead to make the rear floor spoiler move ?
