Help with LCD TV | FerrariChat

Help with LCD TV

Discussion in 'Technology' started by stevieh46360, Aug 10, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. stevieh46360

    stevieh46360 Rookie

    Jul 24, 2006
    23
    Michigan City, IN
    Full Name:
    Steve Hough
    We just purchased our 3rd Plasma/LCD TV yesterday and have run into a problem that I have never seen before. Approx. every 10 seconds the display comes on and toggles between Mono/Stereo. I've read the manual front to back and have not found a way to disable this function. BTW the TV is a Sharp Aquos 32". Any advise would be great. Thanks!
     
  2. Fast_ian

    Fast_ian Two Time F1 World Champ

    Sep 25, 2006
    23,397
    Campbell, CA
    Full Name:
    Ian Anderson
    I presume you mean the TV "setup" menu when you say "display". If I'm correct, I'd suspect the audio connection between the tuner and the TV - Sometimes it's "seeing" a mono signal and others stereo..... How is it connected? Can you try another cable?

    Good luck,
    Cheers,
    Ian
     
  3. stevieh46360

    stevieh46360 Rookie

    Jul 24, 2006
    23
    Michigan City, IN
    Full Name:
    Steve Hough
    I disconnect the cables and then reconnected them. That appeared to have done the trick. Thanks!
     

Share This Page